Оценок - 0, средний балл: 4
(
)
)
|
Фрагмент инструкции
Remote Requires 1 CR2025 battery (pre- installed) LITHIUM BATTERYCR 20253VCR2025PUSHOPEN LITHIUM BATTERYCR 20253VCR2025PUSHOPEN Mounting Under a Cabinet A mounting template , which contains mounting instructions, is included in the packaging. IMPORTANT: You should only use the mounting accessories included with this under cabinet music system when attempting to mount it under a cabinet. Use of unapproved accessories that have not been designed specifically for this unit could lead to safety hazards. CLOCK Setting the Clock 1 Press the POWER button to turn the under cabinet music system off. 2 Press and hold the PROG/CLKSET button for 3 seconds, then release. “CLOCK SET” will begin blinking on the display. 3 Press the SKIP/SEARCH (.) button to adjust the minute. Press the other SKIP/SEARCH (.) button to adjust the hour. 4 Press the PROG/CLKSET button to finish setting the time. Setting the Timer 1 With the under cabinet music system turned off or on, press the TIMER button repeatedly to adjust the timer in increments of 10. (180max, 10min) 2 Press the SKIP/SEARCH buttons to adjust the timer in increments of 1. (ie. 1-9 or 31-39) 3 After the set time has expired, the under cabinet music system will sound an alarm. 4 To cancel the alarm after it has sounded, press the POWER button. 5 To cancel the timer before the alarm has sounded, press the TIMER button repeatedly until it is set to “- -”. CD AND RADIO Loading a CD Programming a CD 1 Press the POWER button to turn the under cabinet music system on. 2 Press the SOURCE button to switch to CD MODE. CD MODE is indicated on the display by two blinking dashes “ - -”, and eventually track numbers. 3 Press the OPEN/CLOSE button to open the CD drawer. 4 Load a CD into the CD drawer, label side facing up. 1 Follow the instructions for LOADING A CD. 2 After the power is on, the music system is in CD MODE, and the CD is loaded, press the STOP button. 3 Press the PROG/CLKSET button. “01”, indicating the current program track, will begin flashing on the display. 4 Press the SKIP/SEARCH buttons to select the CD track you would like to play in the program. 5 Press the PROG/CLKSET button. 6 Repeat steps 3, 4, and 5 to continue programming CD tracks. Up to 20 tracks can be programmed. 7 Press the PLAY/PAUSE button to begin playing the programmed CD. 8 To cancel a program, press the STOP button twice. Playing a CD 1 Follow the instructions for LOADING A CD. 2 After the power is on, the music system is in CD MODE, and the CD is loaded, press the PLAY/PAUSE button to begin playing a loaded CD. Playing the Radio 1 Press the POWER button to turn the under cabinet music system on. 2 Press the SOURCE button to switch to RADIO MODE. RADIO MODE is indicated by “AM” or “FM” on the display. 3 Press the STOP button to switch between AM and FM radio. 4 Turn the TUNING dial on the side of the under cabinet music system to tune the AM or FM radio. LINE INPUT Connecting the Line Input 1 After the under cabinet music system is securely mounted, gently pull down the hidden DEVICE CRADLE from the bottom of the music system. 2 Turn the DEVICE CRADLE so that it faces out. The DEVICE CRADLE will not turn 360 degrees 3 Place an iPod or MP3 player into the DEVICE CRADLE. iPod Touch devices are the most suitable fit. 4 Pull out the retractable LINE INPUT CABLE from behind the cradle and connect it to the stereo headphone jack on an iPod or MP3 player. Using too much force to pull out the LINE INPUT CABLE can result in damage to the cable. Playing Audio from the Line Input 1 Follow the instructions for CONNECTING THE LINE INPUT. 2 Press the POWER button to turn the under cabinet music system on. 3 Press the SOURCE button to switch to AUX MODE. 4 AUX MODE is indicated by “AUX” on the display. 5 Use the controls on the device connected to the LINE INPUT CABLE to begin playing audio. 6 Use the VOLUME buttons on the under cabinet music system to control the volume output. COMPANY INFORMATION Green Initiative Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’ 2009 marks the official launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI and its four brands, iLive, WeatherX, Capri, and GPX, are building upon environmental initiatives introduced at all of their facilities to help formulate and sustain significant and important conservation efforts within its manufacturing and marketing communities. In addition to targeting and selecting energy efficient product features, and structuring ‘green office’ procedures, other initial program efforts include: • Reduction of all packaging sizes • Recyclable plastics for clamshell packages, with a plan to eventually replace plastic with recyclable paper • Recycled fiber board in place of the polyfoam in packing boxes • Recycled plastics in place of the virgin material in product construction International Support To download this User’s Guide in English, Spanish, or French, visit the support section at Para tra...
Эта инструкция также подходит к моделям:Радиоприемники - KC220S (579 kb)