Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Once you have selected your time zone, press the ATOMIC ON/OFF button again to turn on the atomic time function. To indicate you are at the on position, the antenna bands , over the satellite icon ,will reappear flashing. (When it appears flashing the unit is atomic time signal.) 4. If the antenna bands disappears afterwards, the atomic time signal is not available at that moment. Try setting the unit in other locations. Remember to place the unit away from sources of interference such as mobile phones, appliances, TV etc. 5. The antenna bands will appear on screen if the atomic is successful. The radio-controlled at 1:00 am everyday. If previous attempts of reception the home receiver will attempt successful. Each reception cycle Note: You can adjust the the BACKLIGHT 7 Manual Setting of Clock 1. Press & hold the HOUR or MIN button (Fig. 1) until the time begins to flash, then release. 2. While the time is flashing press the HOUR or MIN button until you have reached the desired time. Note: A PM indicator (Fig. 2) will display during the PM hours. Be sure to set the time for the correct 12 hour period - AM (morning) or PM (evening). Listening to Nature Sounds 1. Press the SOUND button (Fig. 1) to activate the nature sounds. 2. Toggle through the SOUND button to select one of the six nature sounds. A corresponding symbol (Fig. 2) will appear next to the sound to indicate which sound is on. 3. To adjust the volume, turn the VOLUME knob (Fig. 1) to your desired level. 4. When finished listening to the sounds you may turn pressing the POWER button. (Fig. 1) Note: When the unit is turned on it will always default mode used. 8 Listening to the Radio 1. Press the RADIO button (Fig. 1). 2. Use the AM/FM switch located on the back of the unit (Fig. 3) to change between bands. 3. Rotate the TUNER (Fig. 1) to select a radio station. 4. To adjust the volume turn the VOLUME knob (Fig 1) to your desired level. 5. When finished listening to the radio you may turn it off by pressing the POWER button. (Fig. 1) Note: Adjust the antenna on the back of the unit to better the radio reception if needed. Playing Audio Compact Discs ( CD) 1. Press the CD OPEN (Fig. 1) button to open the compartment 2. Insert the disc, label side up, into the CD compartment. Note: Be sure CD is securely fastened in to center. 3. Close the CD compartment door 4. Press the CD button (Fig. 1), the number of tracks Note: NO will be displayed if you press CD when there in the disc player 5. Press PLAY/PAUSE (Fig. 1) to begin playing CD 6. Press SEEK/TRACK (Fig. 1) to skip to beginning of the track; press SEEK/TRACK (Fig. 1) twice to skip to the beginning of the previous track; press (Fig. 1) to skip to the next track. 9 7. Press and hold SEEK/TRACK (Fig. 1) to scan backward quickly through a track; press and hold SEEK/TRACK (Fig. 1) to scan forward quickly through a track. 8. Press PLAY/PAUSE (Fig. 1) to pause a playing CD. Press PLAY/PAUSE (Fig. 1) again to resume play. 9. Press STOP (Fig. 1) to stop a CD. 10. To remove disc press CD OPEN to open the compartment door Using The Auto- Timer When the power is on and you are listening to a nature sound, CD, or radio you may set a timer so the unit will automatically turn off. 1. Toggle through the TIMER button (Fig. 1) until the time of your choice is displayed. 15, 30, or 60 minutes. 2. To cancel the timer, toggle through the TIMER button until you reach the off position, or press POWER (Fig. 1). Note: The TIMER ICON (Fig. 2) will disappear after 10 seconds. Setting And Using The Alarm 1. Press the ALARM SET button (Fig. 1). The time will flash. 2. While the time is flashing press the HOUR button (Fig. 1) until you reach the correct hour. Then press the MIN button (Fig. 1) until you reach the desired minute. 3. After 5-10 seconds the alarm set time will stop flashing and it will be programmed, or you may press the ALARM SET button to confirm. Note: The PM indicator (Fig. 2) also applies to the alarm. You can review the alarm setting anytime by pressing the ALARM SET button. 4. To activate the alarm you may choose one of 4 wake options: a. To wake to RADIO press the ALARM MODE (Fig. 1) button once. b. To wake to sounds press the ALARM MODE (Fig. 1) button twice. It will set to the last sound you listened to. If you wish to choose a different sound toggle through the SOUND (Fig. 1) button. c. To wake to BUZZER press the ALARM MODE (Fig. 1) button three times. d. To wake to CD press the ALARM MODE (Fig. 1) button four times. Note: The chosen alarm mode icon (Fig. 2) will display that the alarm is set. 10 11 5. When the alarm sounds you may either: a. SNOOZE: Press the SNOOZE button (Fig. 1) Your sleep time will be extended by 9 minutes. You may use this feature until you turn off the alarm. b. RESET: Turn the alarm off by pressing the POWER (Fig. 1) button. The alarm clock will automatically set for the next day in its current mode. Note: The chosen alarm mode icon (Fig 2) will display to indicate the alarm ...
Эта инструкция также подходит к моделям:Радиоприемники - SoundSpa Platinum SS-6000 (660.51 kb)