Оценок - 3, средний балл: 4.3
(
)
)
|
Фото и характеристики Sony CDP-CX55 |
Фрагмент инструкции
3 Press MEMO INPUT. The flashing cursor (O) appears. 4 Press DISC/CAPS to find the letter type you want. Each time you press the button, the letter type changes cyclically among capital letters (AB), small letters (ab) and numbers (12). The selected letter type appears in the right end of the display. (Continued) Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) 5 Press the number button corresponding to the character you want (indicated beside each number button). The cursor disappears and the first space for the Disc Memo flashes. Each time you press the button, the character changes cyclically among the ones indicated beside the button. If you have made a mistake while inputting the character To correct the character which has been input 1 Press =or + until the cursor moves next to the incorrect character. ALL DISCS CD1 DISC SONYHE S AB 2 Press DEL to delete the incorrect character. ENTER ABC DEF&!? JKL MNOGHI TUV WXYPRS QZ10> Characters assigned to each number button Example: To select the letter E Press the number button 3 twice. nD nE nF Press 3. Press 3. Press 3. To insert a space, press SPACE once. To input a number, press DISC/CAPS twice in Step 4, then press the number button you want. To input symbols, press the number button 1 repeatedly until the symbol you want appears in the display. 6 Press ENTER to select the character. The selected character lights up, and the flashing cursor appears to indicate the next space to be input. You can also go to the next space by pressing other number buttons. 7 Repeat Steps 4 through 6 to input more characters. 8 Press MEMO INPUT to store the Disc Memo. The Disc Memo lights up in the display. ALL DISCS CD1 DISC SONYHITS 2O ALL DISCS CD1 DISC SONYH S AB 3 Input the correct character. ALL DISCS CD1 DISC SONYHITS AB To correct the character currently being input 1 Press DEL to delete the incorrect character. 2 Input the correct character. To insert a character between the input characters Press =or +until the cursor moves next to the point you want to insert, and enter the character. Erasing the Disc Memo 1 Follow Steps 1 and 2 in “Labeling discs on the player” on page 22 to select the Disc Memo you want to erase. 2 Press CLEAR. The Disc Memo disappears. 3 Press INPUT. Repeat Steps 1 through 8 to assign Disc Memos to other discs. Storing Information About CDs (Custom Files) Storing Specific Tracks (Delete Bank) You can delete unwanted tracks and store only the tracks you want. When you select the disc containing a Delete Bank, you can play only the remaining tracks. CONTINUE CHECK JOG SHUFFLE CLEAR 1 Press CONTINUE or SHUFFLE before you start playing. 2 Turn the JOG dial to select the disc. 3 Press CHECK repeatedly until the track you want to delete appears in the display. ALL DISCS CD1 DISC TRACK 2O 1 ON 2O 4 Press CLEAR. “DELETE FILE” and “OFF” appear in the display. ALL DISCS DELETE FILE CD1 DISC TRACK 2O 1 OFF2O If you want to recover the track, press CLEAR again. 5 Repeat Steps 3 and 4 to delete more tracks. You can recover all the tracks you have deleted Hold down CLEAR until “ALL SELECT” appears in the display. Note The deleted tracks are skipped even in the Shuffle or Program Play mode (when the whole disc containing a Delete Bank is programmed as one step). Additional Information Additional Information Precautions On safety • Caution — The use of optical instruments with this product will increase eye hazard. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. On power sources • Before operating the player, check that the operating voltage of the player is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the player. • The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. • If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. • AC power cord must be changed only at the qualified service shop. On placement • Place the player in a location with adequate ventilation to prevent heat build-up in the player. • Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. • Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. On operation • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, leave the player turned on for about an hour until the moisture evaporates. On adjusting volume • Do not turn up the volume while li...