Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Insert the disc, label side up, into the CD compartment. Note: Be sure CD is securely fastened in to center. 3. Close the CD compartment door 4. Press the CD button (Fig. 1), the number of tracks Note: NO will be displayed if you press CD when there in the disc player 5. Press PLAY/PAUSE (Fig. 1) to begin playing CD 6. Press SEEK/TRACK (Fig. 1) to skip to beginning of the track; press SEEK/TRACK (Fig. 1) twice to skip to the beginning of the previous track; press (Fig. 1) to skip to the next track. 9 7. Press and hold SEEK/TRACK (Fig. 1) to scan backward quickly through a track; press and hold SEEK/TRACK (Fig. 1) to scan forward quickly through a track. 8. Press PLAY/PAUSE (Fig. 1) to pause a playing CD. Press PLAY/PAUSE (Fig. 1) again to resume play. 9. Press STOP (Fig. 1) to stop a CD. 10. To remove disc press CD OPEN to open the compartment door Using The Auto- Timer When the power is on and you are listening to a nature sound, CD, or radio you may set a timer so the unit will automatically turn off. 1. Toggle through the TIMER button (Fig. 1) until the time of your choice is displayed. 15, 30, or 60 minutes. 2. To cancel the timer, toggle through the TIMER button until you reach the off position, or press POWER (Fig. 1). Note: The TIMER ICON (Fig. 2) will disappear after 10 seconds. Setting And Using The Alarm 1. Press the ALARM SET button (Fig. 1). The time will flash. 2. While the time is flashing press the HOUR button (Fig. 1) until you reach the correct hour. Then press the MIN button (Fig. 1) until you reach the desired minute. 3. After 5-10 seconds the alarm set time will stop flashing and it will be programmed, or you may press the ALARM SET button to confirm. Note: The PM indicator (Fig. 2) also applies to the alarm. You can review the alarm setting anytime by pressing the ALARM SET button. 4. To activate the alarm you may choose one of 4 wake options: a. To wake to RADIO press the ALARM MODE (Fig. 1) button once. b. To wake to sounds press the ALARM MODE (Fig. 1) button twice. It will set to the last sound you listened to. If you wish to choose a different sound toggle through the SOUND (Fig. 1) button. c. To wake to BUZZER press the ALARM MODE (Fig. 1) button three times. d. To wake to CD press the ALARM MODE (Fig. 1) button four times. Note: The chosen alarm mode icon (Fig. 2) will display that the alarm is set. 10 11 5. When the alarm sounds you may either: a. SNOOZE: Press the SNOOZE button (Fig. 1) Your sleep time will be extended by 9 minutes. You may use this feature until you turn off the alarm. b. RESET: Turn the alarm off by pressing the POWER (Fig. 1) button. The alarm clock will automatically set for the next day in its current mode. Note: The chosen alarm mode icon (Fig 2) will display to indicate the alarm is still set. If you wish to change the wake mode follow step 4 under Setting and Using the Alarm. c. OFF: To completely turn off the alarm so it is not set for the next day, toggle through the ALARM MODE (Fig. 1) button until no alarm icon appears. Note: If the alarm sounds for 30 minutes continuously it will automatically turn off. USING THE PROJECTION FEATURE 1. To turn the projection feature on, slide the ON/OFF switch (Fig 3) on the back of the unit to the ON position. The time is now projected on the wall or ceiling. NOTE: If the projection feature is OFF, you may hit the SNOOZE button (Fig. 1) to trigger the 15 seconds of projections. 2. The angle of the projector can be adjusted to angle on the ceiling or wall by moving the PROJECTOR TUBE (Fig. 3) forward or backward. 3. To turn the angle of the time that appears on the wall or ceiling, rotate the TIME ROTATION KNOB (Fig. 3) until you have reached your desired result. NOTE: The TIME ROTATION KNOB will rotate up to 350 degrees. 4. To focus the time on the wall or ceiling rotate the FOCUS KNOB (Fig. 3) until you have reached your desired result. 12 13 Maintenance To Store You may leave the unit on display, or you can store it in its box or a cool, dry place. To Clean Use only a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or abrasive cleaner to clean. Modifications not authorized by the manufacturer may void users authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined turning the equipment off and on, the user is encouraged to try to the interference by one or more of the foll...
Эта инструкция также подходит к моделям:Радиоприемники - SoundSpa Platinum SS-6000 (660.51 kb)