Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
3. Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission. 4. Turn on the Nursery Unit using the ON/OFF switch. The green power light should come on. 5. Install a 9 volt battery into the Parent’s Unit, or plug it into a working 120 volt AC outlet using the other AC adapter. 6. Turn on the Parent’s Unit using the volume control dial. The red power light should come on. • The Parent’s Unit can use either a 9 volt battery or standard 120 volt AC household current. The Nursery Unit uses standard 120 volt AC household current only. The included AC adapters must be used for this purpose. • To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the unit. Then plug adapter into a standard wall outlet. • Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any circumstances. • If units do not work, check that AC adapters are plugged into working outlets. • When electricity is off (from a power failure, etc.), the transmitter will NOT work, since it only operates on AC current. Using AC Adapters Selecting Channels • Check that both Nursery Unit and Parent’s Unit are set to the same channel. • To change channel, slide Channel button to either A or B on BOTH units. Setting Up the Baby Monitor 1. Check that both Nursery Unit and Parent’s Unit are set to the same channel. 2. Place the Nursery Unit within 10 feet (2-3 meters) of your baby. Plug an AC adapter into the jack on the side of the Nursery Unit. Plug it into a working 120 volt AC outlet. 3. Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission. 4. Turn on the Nursery Unit using the ON/OFF switch. The green power light should come on. 5. Install a 9 volt battery into the Parent’s Unit, or plug it into a working 120 volt AC outlet using the other AC adapter. 6. Turn on the Parent’s Unit using the volume control dial. The red power light should come on. 7 Testing the System It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units any time they may have been damaged or have not been used for a long time. 1. If two adults are present, have one take the Parent’s Unit to different locations, trying various volume settings, while the other speaks into the Nursery Unit. 2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it. 3. When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly. 4. If there is sound interference, switch both the Nursery Unit and the Parent’s Unit to the other channel setting. NOTE: As with all radio frequency devices, transmission range and reception may vary. Your Nursery Monitor uses public airwaves, so it is possible for conversations near the Nursery Unit to be broadcast to other nursery monitors, radios, cordless phones or scanners outside your home. For your privacy, always turn off the Nursery Unit when not in use. Testing the System It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units any time they may have been damaged or have not been used for a long time. 1. If two adults are present, have one take the Parent’s Unit to different locations, trying various volume settings, while the other speaks into the Nursery Unit. 2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it. 3. When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly. 4. If there is sound interference, switch both the Nursery Unit and the Parent’s Unit to the other channel setting. NOTE: As with all radio frequency devices, transmission range and reception may vary. Your Nursery Monitor uses public airwaves, so it is possible for conversations near the Nursery Unit to be broadcast to other nursery monitors, radios, cordless phones or scanners outside your home. For your privacy, always turn off the Nursery Unit when not in use. Operation To Listen To Baby • Check that Nursery Unit and Parent’s Unit are on the same channel. • Turn on Nursery Unit using the ON/OFF switch. • Turn on Parent’s Unit using the Volume ON/OFF switch. 8 Solving Problems Solving Problems DO NOT ATTEMPT TO MODIFY THE UNIT. Any modifications to the transmitter and/or receiver can void the operator’s authority to operate the equipment. • Power is turned ON for both units • Both units are plugged in (or battery is fresh in Parent’s Unit) • Electrical outlet works • Units are set to same channel • Volume is turned up on Parent’s Unit • Parent’s Unit is in range of the Nursery Unit Most problems have a simple solution. First, check that: • Parent’s Unit too far from Nursery Unit — move closer. • Large objects blocking the signal — try repositioning Nursery Unit. • Ch...
Эта инструкция также подходит к моделям:Радионяни - UltraClear 2755 (347.61 kb)
Радионяни - UltraClear 2755GM (347.61 kb)
Радионяни - UltraClear 2755B (347.61 kb)