Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Press the MUTE button again or the VOL button ("'■'*') when the sound is muted to hear sound again. 11. RETURN Button (O) Returns to the previous menu. 12. MEDIA.P Button Used as a shortcut button to MEDIA.P. 13. VOL Button Used to control the volume. 14. FAST FORWARD button (►►) Fast forward the movie in the MEDIA.P mode. 15. PAGE UP Button (W) Use to select the next file. 16. SUBTITLE Button Sets subtitles. 17.STOP Button (■) Stops video or music in the MEDIA.P mode. 0 Make sure to place your remote control on a table or desk. If you step on the remote control, you may fall and hurt yourself or the product may be damaged. 0 You can use the remote control up to a distance of about 23 feet(7 m) from the product. 3-3 Using 3-4 LED Indications LED Indications • : Light is On *' : Light is Blinking o : Light is Off STAND BY TEMP INFORMATION • o This state occurs when power is supplied to the projector normally after the POWER button on the projector or the remote control has been pressed. c o • This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed. • The POWER button is pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. o o The projector is in normal operating condition. CJ CJ Refer to Action 1 below if the cooling fan inside the projector is not in normal operation condition. o c Power is turned off automatically when temperature inside of the projector goes beyond the control limit. Refer to Action 2. c • This state occurs when the auto color compensation function has an error. Refer to Action 3. Clearing Indicator Problems CLASSIFICA TION STATE MEASURES Action 1 When the cooling fan system is not in normal operating condition. If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact a Samsung service center. Action 2 When temperature inside of the projector becomes too high. Adjust the installation state of your projector by referring to the Installation Precautions section listed above. Cool down your projector sufficiently and then operate it again. If the same problem occurs continually, contact a Samsung service center. Action 3 When the sensor system inside the projector is not operating normally. Cool your projector down sufficiently and then operate it again. If the same problem occurs again, contact a Samsung service center. 0 This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance and is part of normal operation. Using 3-4 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure MENU SUB-MENU M Input Source List Edit Name ■ Picture Mode Size Position Digital NR Black Level Film Mode PC Zoom EH Setup Install V-Keystone Background Test Pattern Factory Default Video Type H Option Language Menu Option Information ®l 3-5-1. Input Input Source List Video ► Edit Name ► m # m 4 Move [♦? Enter Q Return MENU DESCRIPTION Source List You can select a device connected to the projector to display. •