Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Replace blade when it is worn shorter than 6 in. Remove blade and holders before greasing to prevent damage to gear and bearings. 1. Shut engine off. 2. Remove split pin (A). 3. Rotate blade until holes in inner blade adapter (B) and gear box align. Insert locking tool to lock PTO shaft (C). NOTE Shield cover not shown for illustration clarity. NOTE Blade nut (D) is left hand thread. 4. Remove blade nut (D) in a clockwise direction using scrench. Remove outer blade adapter (E), blade (F) and inner blade adapter (B). 5. Remove plug (G) and grease gear housing. Do not over fill - grease will emerge between PTO shaft (C) and seal when over full. NOTE Shield cover not shown for illustration clarity. 6. Install inner blade adapter (B) onto PTO shaft (C). 7. Install and center new blade (F) onto inner adapter (B). 8. Install outer adapter (E) and nut (D). Tighten nut (D) firmly, counterclockwise (CCW). IMPORTANT Never reuse old split pin. 9. Install new split pin (A) (#89850201130) to secure nut. POWER EDGER ATTACHMENT OPERATOR'S MANUAL 11 Drive Shaft (Lower) IMPORTANT Lower and upper drive shaft must be lubricated with high temperature automotive grease every 25 hours of operation, otherwise drive shaft assembly overheating and failure can result. 1. Loosen two (2) screws (A) and remove center locating screw (B). Pull gear box and shield from drive shaft housing. 2. Pull flexible cable (C) from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of ECHO® LUBETM. 3. Slide the flexible cable (C) back in the drive housing. DO NOT get dirt on the flex cable. 4. Install the gear housing and shield assembly. AB C SERVICING INFORMATION PARTS Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. ____________ SN. __________ DEALER? SERVICE Call Service of this product during the warranty period must be performed 1-800-432-ECHO by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required. CONSUMER PRODUCT ECHO CONSUMER PRODUCT SUPPORT SUPPORT If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the ECHO 1-800-673-1558 Consumer Product Support Department at 1-800-673-1558 from 8:30 am 8:30 - 4:30 Mon - Fri C.S.T. to 4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit to help your Consumer Product Support Representative. WARRANTY REGISTRATION You may register your Echo equipment using the warranty registration card or register on-line at Registering provides a direct link between you and ECHO if we find it necessary to contact you. ADDITIONAL OR REPLACEMENT MANUALS Safety Manuals in English/Spanish or English/French are available, free of charge, from your ECHO dealer or at Operator's and Parts Manualsare available by: • Downloading free from • Purchasing from your Echo Dealer. • Sending a check or money order for $2.00 per Parts Catalog or $1.50 per Operator's Manual made payable to ECHO, INCORPORATED. State on a sheet of paper the model number and serial number of the ECHO unit you have, part number of the manual (if known), your name and address and mail to address above. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video. Available Parts Catalog Power Edger Attachment 99944200470 S/N S06000001001 - S06000057000 P/N 99922203066 ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 60047 SUPPLEMENT TO OPERATOR’S MANUAK PART NUMBER X7532278700 (X753001210( FOR MODEL: POWER EDGER ATTACHMENS P/N 99944200470 S/N 001001 & UP This Supplement contains important informationPlease keep with your Operator’s Manual Your unit was manufactured using Echo.s new open-face, all-metal blade guard, and improvec heavy-duty gear case Specification (Pg. 7( Gear Ratin ----------------------------, 2.07:0 Gear Case Weight w/Bladd ---------------------, 2.54 kg (5.6 lbs.( NOTE: Grease gear case every 15-25 hours of use Maintenance (Pg. 9( Maintenance Intervalr Drive Shafs Drive Shafs Every 50 hours of usd Gear Housinf Every 15-25 hours of usd IMPORTANT9 Lower and upper drive shaft must be lubricatec with high temperature automotive grease every 50 hours of opera- Blade Replacement/Lubrication (Pg. 10( tion, otherwise drive shaft assembly overheating and failure can Tools R...