Оценок - 4, средний балл: 4.3
(
)
)
|
Фото и характеристики Black & Decker GH710 |
Фрагмент инструкции
TROUBLESHOOTING TOOL RUNS SLOWLY approximately 5-3/8 inches (136mm) from the spool. If it does, cut it off so that it just reaches the line trimming blade. AUTOMATIC LINE FEED DOES NOT WORK • Keep the tabs depressed and remove the spool from the spool housing in the trimmer head. • Pull the cutting line until it protrudes approximately 5-3/8 inches (136mm) from the spool. If insufficient cutting line is left on the spool, install a new spool of cutting line. • Ensure that the line is not crisscrossed on the spool as detailed in figure N. If it is, unwind the cutting line, then wind it back on the spool neatly so that the lines do not cross. 10 • Check that the spool housing can rotate freely. Carefully clean it if necessary. • Check that the cutting line does not protrude more than • Align the tabs on the spool cap with the cut outs in the housing. • Push the spool cap onto the housing until it snaps securely into place. • If the cutting line protrudes beyond the trimming blade, cut it off so that it just reaches the blade. If the automatic line feed still does not work or the spool is jammed, try the following suggestions: • Carefully clean the spool and housing. • Remove the spool and check if the lever in the spool housingcan move freely. • Remove the spool and unwind the cutting line, then wind it on neatly again. Replace the spool into the housing. SERVICE INFORMATION All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuinefactory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or visit FULL TWO-YEAR HOME USE WARRANTY Black & Decker (U.S.) Inc. warrants this product for two yearsagainst any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways. The first is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer.s policy for exchanges (usually 30 to 90 daysafter the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to aBlack & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under "Tools-Electric" in the yellow pages of the phone directory. This warranty does not apply to accessories. This warranty givesyou specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest Black & DeckerService Center. This product is not intended for commercial use. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement. LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check countryspecific warranty information contained in the packaging, call thelocal company or see the website for warranty information. See .Tools-Electric. – Yellow Pages – Imported by Black & Decker (U.S.) Inc., 701 E. Joppa Rd. for Service & Sales Towson, MD 21286 U.S.A. TAILLE-BORDURE / COUPEBORDURE MODE D’EMPLOI Numero de modele GH710 Merci d.avoir choisi Black & Decker! Consulter le site Web enregistrer votre nouveau produit. ALIRE AVANT DE RETOURNER CE PRODUIT POUR QUELQUE RAISON QUE CE SOIT : Si des questions ou des problemes surgissent apres l.achat d.un produit Black & Decker, consulter le site Web HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS pour obtenir des reponses instantanement 24 heures par jour. Si la reponse est introuvable ou en l.absence d.acces a l.Internet, composer le 1-800-544-6986 de 8 h a 17 h HNE, du lundi au vendredi, pour parler avec un agent. Priere d.avoir le numero de catalogue sous la main lors de l.appel. CONSERVER CE MANUEL POUR UN USAGE ULTERIEUR. 12 Numero de modele GH710 VOICI DES RENSEIGNEMENTS IMPORTANTSQU.IL VOUS FAUT CONNAITRE : • Le pare-main doit etre installe avant de debuter le taillageou la coupe sinon le moteur surchauffera (page 17). • Utiliser seulement un fil ROND de 1,7 mm (0,065 po) dediametre lors du remplacement (modele DF-065 de B&Drecommande), sinon l.appareil ne fonctionnera pascorrectement (page 20). • Eviter de frapper la tete d.alimentation contre le sol. Eneffet, cela endommagera le mecanisme d.alimentation. • Toujours utiliser le dispositif de retenue du cordon (page 18). TABLE DES MATIERES TABLE DES MATIERES Directives de ...