Оценок - 3, средний балл: 3.7 ( )

Производитель: Northern Industrial Tools Размер: 1.38 mb Название файла: Язык инструкции:

Service or maintenance performed by unqualified personnel could result in a risk of injury. 24. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Hoist. These carry important information. If unreadable or missing, contact the distributor, Northern Tool + Equipment for a replacement. 2. Always wear safety impact eye goggles and heavy work gloves when using the Hoist. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Northern Tool + Equipment. 3. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. 4. Always maintain a firm grip on the tool. 5. Always keep the extension cord away from moving parts on the tool. 6. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Hoist. 7. Do not force the Hoist. This tool will do the work better and safer at the speed and capacity for which it was designed. 8. Never use the Hoist to lift people or animals. 9. Always leave a minimum of 4 wraps of cable on the drum. The cable fastener on this wire rope Hoist is not rated for the maximum capacity of the Hoist. PAGE 5 Additional Specific Safety Rules 10. Do not exceed the maximum lift capacity. The application, size and type of load, the attachments to be used and the period of use must be taken into account. 11. Do not stand under hoisted loads. 12. Do not operated the Hoist in wet conditions. Do not allow the Hoist to freeze. 13. If pushing the lift button continually does not have any affect, do not continue. This is a sign that the load exceeds the maximum capacity. 14. Never adjust the cable or work on the Hoist when it is plugged into an outlet. 15. Always inspect the cable and hook prior to use. If he cable is damaged in any way, do not use it. Hooks that are bent, worn or whose openings are enlarged beyond normal throat opening should not be used. 16. If the Hoist is stopped during the lowering of a load it is normal for the load to drop a few inches more due to intertia. 17. The Hoist motor does not have an overload cut-out. If you are unable to hoist a load and the load is under the maximum lift capacity, stop the Hoist and allow the motor to cool down before trying again. 18. Make sure the cable is correctly wound around the wheel. See FIGURE 1 below. 19. Do not support a load over or around people or animals. 20. Do not leave load suspended in the air unattended. 21. Do not allow a load to bear against the hook latch. Allowing a load to bear against the hook latch can result in loss of load. 22. Do not allow load to swing or twist while hoisting. 23. Do not use cable as a sling or wrap cable around a load. PAGE 6 WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. GROUNDED TOOLS: TOOLS WITH 3- PRONG PLUGS 1. Tools marked with “Grounding Required” have a 3-wire cord and 3-prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A.) 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding s...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: