The term “tool” in all of the warnings listed below refers to your mains-operated (corded) tool or battery-operated (cordless) tool. !WARNING The following labels are on your laser tool for your convenience and safety. They indicate where the laser light is emitted by the tool. ALWAYS BE AWARE of their location when using the tool. Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself. This tool produces laser class 2 laser radiation and complies with 2

If you TRIGGER SWITCH experience bit binding and clutch begins toYour tool is equipped with a variable speedslip, immediately turn the tool "OFF" andtrigger switch. The tool speed can becorrect the condition leading to the bit binding. controlled from the minimum to the maximum AUXILIARY HANDLE nameplate RPM by the pressure you apply to The auxiliary handle will provide additional the trigger. Apply more pressure to increase control, support and guidance for the tool. The the speed and release p

1 FIG. 3 -2 BM 2609140574 08-08 9/3/08 8:40 AM Page 3 !WARNING Safety Rules for Multi-Detector Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE THESE INSTRUCTIONS The multi-detector’s ability to detect objects is affected by the proximity of other equipment that produce strong magnetic or electromagnetic fields, and by moisture, metallic building materials, foil-laminated insulation materials and/or conductive w

Never use the cord secure and support the workpiece to a to carry the tools or pull the plug from an stable platform. Holding the work by hand or outlet. Keep cord away from heat, oil, sharp against your body is unstable and may lead to edges or moving parts. Replace damaged loss of control. cords immediately. Damaged cords increase the risk of electric shock. -2 BM 1619929567 10-03 3/2/04 9:40 AM Page 3 Do not force tool. Use the correct tool for operation. If damaged, have the tool your applic

2). NOTE: You may notice some “wobble” or “run out” of the bit when run in a no load condition. This is due to the quick change SDS tool holder assembly. However, once the bit has a load placed upon it, the bit automatically centers itself to produce an accurate hole. NOTE: The high efficiency available from the rotary hammers can only be obtained if sharp and undamaged accessories are used. The "cost" to maintain sharp and undamaged accessories is more than offset by the "time saved" in operati

Such preventive safety measures reduce the risk of starting the tool accidentally. FORWARD/REVERSING LEVER & TRIGGER LOCK -7- VENTILATION OPENINGS BATTERY PACK AUXILIARY HANDLE DUST SHIELD LOCKING SLEEVE DRILL/HAMMER DRILL SELECTION DIAL BUTTON DEPTH GAUGE VARIABLE SPEED TRIGGER SWITCH NOTE: For tool specifications refer to the nameplate on your tool. FIG. 1 BATTERY CHARGED CONDITION INDICATOR WING KNOB Model Number 11225VSR 11225VSRH Shank style SDS SDS Charge time 15 min. 22 min. 26 min. Batte

protection. Dust mask, non-skid safety Do not abuse the cord. Never use the shoes, hard hat, or hearing protection must cord to carry the tools or pull the plug be used for appropriate conditions. -2 BM 1619929519 12/02 12/10/02 2:52 PM Page 3 Tool Use and Care other condition that may affect the tools Use clamps or other practical way to operation. If damaged, have the tool secure and support the workpiece to a serviced before using. Many accidents are stable platform. Holding the work by hand

The term “power tool” inall of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. SAVE THESE INSTRUCTIONS Work area safetyKeep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power tools create sparks which may ignite the dustor fumes. Keep children and bystanders away whileoperating a power to

Holding the work by hand or outlet. Keep cord away from heat, oil, sharp against your body is unstable and may lead to edges or moving parts. Replace damaged loss of control. cords immediately. Damaged cords increase the risk of electric shock. -2 BM 1619929522 12/02 12/10/02 3:43 PM Page 3 Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use tool if switch does not turn it “ON” or “OFF”.

Do not stare into the beam. Class 2 Laser product. Radiacion laser. No mire al rayo. Producto laser de Clase 2. Rayonnement laser. Ne regardez pas directement dans le faisceau. Produit laser de Classe 2. IEC 60825-1:2007-03 <1mW, 635 nm Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, 7/26/2001 2 OPENOPENOPEN 1 1 2 3 4 5 6 7 9 10 11 8 13 2 605 438 682 12 1 618 C01 066 D CBAOR FEFE -3 14142 607 990 0310 601 015 B10160 601 069 110GH0 601 015 A10171518 6cm