Оценок - 3, средний балл: 4.3 ( )

Производитель: Dacor Размер: 899.58 kb Название файла: Язык инструкции:

Open the door. 2. Press the START/STOP button. 3. After a brief pause, the dishwasher will resume the previous cycle. START STOP Sanitizing the Dishes SANI-RINSE If you want a high temperature rinse after the wash cycle for maximum sanitization: 1. Press the NORMAL button to select the normal wash cycle. 2. Press SANI-RINSE. (Pressing SANI-RINSE a second time will turn sani-rinse off again.) 3. Press START/STOP. 4. Close the door. After a short pause, the dishwasher will start. SANI RINSE NORMAL START STOP IMPORTANT: SANI-RINSE can only be selected when the NORMAL wash cycle is selected. Use and Care Manual Operating Your Dishwasher The DELAY Feature To set your dishwasher to start automatically at a later time: 1. Press one of the wash cycle buttons or the rinse RINSECRYSTAL START STOP NORMAL HEAVY CRYSTAL RINSE DELAY SANI RINSE CANCEL SECURE button. 2. If you have selected NORMAL, you may press the SANI-RINSE button for maximum sanitization. HEAVY 3. Repeatedly press the DELAY button until the number of hours you want to delay operation appears on the numeric display. You can delay the start of your dishwasher up to 12 hours. 4. After you select the delay time, press START/STOP. 5. Close the door completely. The dishwasher will start after the selected number of hours. DELAY START STOP NORMAL To cancel the delay function, open the door and press CANCEL. Changing the Cycle After You Start You can change the cycle and option selections after you start your dishwasher. To change the cycle: 1. Open the door. The dishwasher stops operating. 2. Press the CANCEL button twice. CANCEL X 2 3. Press the button for the desired wash or rinse cycle (NORMAL, HEAVY, CRYSTAL or RINSE). 4. If you have selected NORMAL, you may press the SANI-RINSE button for maximum sanitization. 5. Press the START/STOP button. 6. Close the door. NORMAL HEAVY START STOP 7. After a short pause, operation will resume. RINSECRYSTAL Dacor® Dishwasher Operating Your Dishwasher The Cycle Memory Feature Your dishwasher remembers the settings for the last cycle it ran. If you want your dishwasher to run the same cycle as it ran the previous time: 1. Press the START/STOP button once. The START/STOP button light will flash and the lights on the buttons for the last cycle and options run will be lit. 2. Press the START/STOP button again to run the previous cycle (or you may select a different cycle, then press START/STOP if you don’t want to run the previous cycle). START STOP START STOP 3. Close the door. After a short pause, the dishwasher will begin to operate. If the delay feature was used during the previous cycle, your dishwasher will start after the number of hours originally selected. Draining Standing Water To drain standing water from the bottom of your dishwasher: 1. Press NORMAL. 2. Press START/STOP. 3. Press CANCEL. 4. Close the door. After a short pause, you will hear the water in the dishwasher begin to drain. Once the water is drained, the dishwasher will stop. NORMAL START STOP CANCEL IMPORTANT: Your dishwasher also drains the water in the bottom at the start of each wash and rinse cycle. The SECURE Feature To secure the control panel: 1. Press and hold the SECURE button down for three seconds. All control panel lights are deactivated and none of the buttons operate. SECURE 2. To turn off the secure feature, press and hold the SECURE button down for three seconds. The control panel beeps when you turn this feature on and off. Use and Care Manual Cleaning and Maintenance ! CAUTION: Exercise caution when cleaning around the control panel area and the exterior indicator light on the front of the door. Do not use spray cleaners of any kind on these areas. Cleaning the Interior Surfaces • The dishwashing compartment of your Dacor dishwasher is constructed of high quality stainless steel. It remains clean during normal use. • The control panel and the racks may be wiped clean, if necessary, with a soft damp rag. • Food particles on the silverware basket can be rinsed clean under a faucet with warm water. Filters and Strainer Baskets ! CAUTION: Do not operate the dishwasher without the strainer and the two filters in place. The strainer and filter system is designed to keep large food particles out of the mechanical parts. When you observe food in the strainer basket or filters, clean them as follows: 1. Remove the strainer by turning it counterclockwise and lifting it straight up (see page 21). 2. Remove the ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: