Оценок - 2, средний балл: 4 ( )

Производитель: Dacor Размер: 899.58 kb Название файла: Язык инструкции:

NORMAL HEAVY RINSECRYSTAL 3. Press START/STOP. The numeric display will show the length of the cycle in minutes. 4. Close the door. START STOP 5. Push on the door handle to make sure that the door is completely shut. After a brief pause, the dishwasher will start. Adding a Dish After You Start You can add a dish, if needed, after starting your dishwasher. Dacor recommends that you only add items during the first five minutes of operation to make sure they get clean. To add a dish: 1. Open the door. The dishwasher will stop operating. 2. Wait a moment for the steam to clear. 3. Without touching any of the hot surfaces or racks, insert the item into one of the racks, following normal loading instructions. 4. Close the door. 5. Push on the door handle to make sure that the door is completely shut. After a short pause, operation will resume. Dacor® Dishwasher Operating Your Dishwasher Stopping Your Dishwasher During Operation CANCEL To stop the current cycle and drain your dishwasher: 1. Open the door. The dishwasher will stop operating. 2. Press CANCEL. 3. Close the door. After a short pause, you will hear the water in the dishwasher begin to drain. Once the water is drained, the dishwasher will stop. CANCEL IMPORTANT: If you press the CANCEL button twice, the dishwasher will stop completely. The water inside the dishwasher will not drain. Pausing Dishwasher Operation STOP To temporarily pause dishwasher operation: 1. Open the door. The dishwasher will stop operating. 2. Press the START/STOP button. 3. The door may be closed and the dishwasher will not start. START STOP To resume the dishwasher cycle: 1. Open the door. 2. Press the START/STOP button. 3. After a brief pause, the dishwasher will resume the previous cycle. START STOP Sanitizing the Dishes SANI-RINSE If you want a high temperature rinse after the wash cycle for maximum sanitization: 1. Press the NORMAL button to select the normal wash cycle. 2. Press SANI-RINSE. (Pressing SANI-RINSE a second time will turn sani-rinse off again.) 3. Press START/STOP. 4. Close the door. After a short pause, the dishwasher will start. SANI RINSE NORMAL START STOP IMPORTANT: SANI-RINSE can only be selected when the NORMAL wash cycle is selected. Use and Care Manual Operating Your Dishwasher The DELAY Feature To set your dishwasher to start automatically at a later time: 1. Press one of the wash cycle buttons or the rinse RINSECRYSTAL START STOP NORMAL HEAVY CRYSTAL RINSE DELAY SANI RINSE CANCEL SECURE button. 2. If you have selected NORMAL, you may press the SANI-RINSE button for maximum sanitization. HEAVY 3. Repeatedly press the DELAY button until the number of hours you want to delay operation appears on the numeric display. You can delay the start of your dishwasher up to 12 hours. 4. After you select the delay time, press START/STOP. 5. Close the door completely. The dishwasher will start after the selected number of hours. DELAY START STOP NORMAL To cancel the delay function, open the door and press CANCEL. Changing the Cycle After You Start You can change the cycle and option selections after you start your dishwasher. To change the cycle: 1. Open the door. The dishwasher stops operating. 2. Press the CANCEL button twice. CANCEL X 2 3. Press the button for the desired wash or rinse cycle (NORMAL, HEAVY, CRYSTAL or RINSE). 4. If you have selected NORMAL, you may press the SANI-RINSE button for maximum sanitization. 5. Press the START/STOP button. 6. Close the door. NORMAL HEAVY START STOP 7. After a short pause, operation will resume. RINSECRYSTAL Dacor® Dishwasher Operating Your Dishwasher The Cycle Memory Feature Your dishwasher remembers the settings for the last cycle it ran. If you want your dishwasher to run the same cycle as it ran the previous time: 1. Press the START/STOP button once. The START/STOP button light will flash and the lights on the buttons for the last cycle and options run will be lit. 2. Press the START/STOP button again to run the previous cycle (or you may select a different cycle, then press START/STOP if you don’t want to run the previous cycle). START STOP START STOP 3. Close the door. After a short pause, the dishwasher will begin to operate. If the delay feature was used during the previous cycle, your dishwasher will start after the number of hours originally selected. Draining Standing Water To drain standing water from the bottom of your dishwasher: 1. Press NORMAL. 2. Press START/STOP. 3. Press C...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: