Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
.If you are connected via a PBX, a longer or shorter recall time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX supplier for the correct setting. .When you receive a second call during a conversation, you will hear a signal tone following the call waiting tone and the conversation will be interrupted for approximately a second. The tones are generated from the telephone company. This is not fault of the product as these events are normal. For Call Waiting Service Users in New Zealand Make sure the recall time is set to 600 msec for use with Telecom’s Call Waiting Service. Press (RECALL)if you hear a call-waiting tone while talking. .The first call is put on hold and you can answer the second call. .To return to the first caller, press (RECALL)again. 6 Things You Should Know OThings 6 Things You Should Know OThings 6-A Battery 6-B Battery Replacement Recharge When the RECHARGE indicator flashes or the unit beeps intermittently, place the handset on the base unit for about 15 hours to recharge the battery. RECHARGE Indicator Battery information: After your Panasonic battery is fully charged: .The battery operating time may vary depending on usage conditions and ambient temperature. .As preventative maintenance, clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or humidity. Otherwise the battery may not charge properly. .If the battery is fully charged, you do not have to place the handset on the base unit until the RECHARGE indicator flashes. This will maximize the battery life. .The battery cannot be overcharged. 6-C Base Unit Location 6-D Wall Mounting If the RECHARGE indicator flashes after being fully charged, replace the battery with a new Panasonic P-P301 (KX-A36A) battery. When replacing the battery, programmed information may be erased. Reprogram if necessary. 1 1 Press the notch on the handset cover firmly and slide it as indicated by the arrow. Operation Operating time While in use (TALK) Up to about 5 hours While not in use (Standby) Up to about 14 days Red LeadBlack Lead Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise- free operation, the recommended base unit location is: Away from electrical appliances In a HIGH and CENTRAL such as a TV, personal computer, location with no obstructions cellular phone charging units such as walls. Extend fully. or another cordless phone. This unit can be mounted on a wall. To Power Outlet Screws and Socket OR 8.3 cm For Australia To Telephone Plug For New Zealand To Single-Line Telephone Jack Wall Template 8.3 cm 2 2 Replace the battery and close the cover. .Insert the battery plug into the connector as shown in the picture. .Be sure wires are free from being pressed by the battery body or the handset cover. 3 3 Make sure to charge the new battery for about 15 hours. 1 1 Pull down the handset hook until ...
Эта инструкция также подходит к моделям:Планшеты - KX-TC1200NZW (375.16 kb)
Планшеты - KX-TC1200NZF (375.16 kb)
Планшеты - KX-TC1200ALW (375.16 kb)
Планшеты - KX-TC1200ALS (375.16 kb)