Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The TALK indicator light must be off before programming. TALK Indicator (PAUSE) (DIRECT) (PROGRAM) 2 Enter a phone number up to 16 digits. 3 Press (DIRECT). .A beep sounds. .If a pause is required for dialling, press (PAUSE)where needed. Pressing (PAUSE)counts as one digit (5-C). Speed Dialler Section 3/4 3-B Dialling a Stored Number (TALK)and Indicator (AUTO) Memory Station Numbers 1 1 Press (TALK). .The TALK indicator lights. 2 2 Press (AUTO). 3 3 Press the memory station number ((0)to (9)). .The stored number is dialled. One-Touch Dialler 4-B Dialling a Stored Number in the DIRECT Button 1 1 Press (TALK). .The TALK indicator lights. 2 2 Press (DIRECT). .The stored number is dialled. (DIRECT) (TALK)and Indicator 5 Special Features Section 5 (TALK) (AUTO) (RECALL) (PAUSE) (PROGRAM) IN USE/CHARGE Indicator (HANDSET\LOCATOR) 5-A Handset Locator 1 1 You can locate the handset or page the handset. Press (HANDSET\LOCATOR)on the base unit. 2 2 .The IN USE/CHARGE indicator flashes and the handset beeps for 1 minute. To stop paging, press (HANDSET\LOCATOR)again or press (TALK)twice on the handset. 5-B Automatic Security Code Setting Whenever you place the handset on the base unit, the unit automatically selects one of 65,000 security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. 5-C How to use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press (PAUSE)if a pause is required for dialling with a PBX or to access a long distance service. Ex: Line access number (9)(PBX) (9)(PAUSE) Phone number .Pressing (PAUSE)once creates a 3.5 second pause. This prevents misdialling when you redial or dial a stored number. .Pressing (PAUSE)more than once increases the length of the pause between numbers. 5-D RECALL Button Pressing (RECALL)allows you to use special features of your host PBX such as transferring an extension call or accessing a special telephone services (optional), such as call waiting. Selecting the recall time The recall time depends on your telephone exchange or host PBX. You can select the following recall times: “90, 100, 110, 250, 300, 400, 600 or 700 msec (milliseconds)”. KX-TC1200AL comes from the factory set to “100 msec” and KX-TC1200NZ comes set to “600 msec”. The TALK indicator light must be off before programming. Press (PROGRAM) Dialing button ( 1 to 8 ) (AUTO) (RECALL). 1 : 90 msec 2 : 100 msec 3 : 110 msec 4 : 250 msec 5 : 300 msec 6 : 400 msec 7 : 600 msec 8 : 700 msec .A beep sounds. .If 3 beeps sound after programming, a wrong key was pressed. Start again from the beginning. .Users in Australia can access Telstra’s “EASY CALL” service by having the recall time set at 100 msec (this is the factory default setting), and then follow Telstra’s “EASY CALL” instructions to operate this service. .If you are connected via a PBX, a longer or shorter recall time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX s...
Эта инструкция также подходит к моделям:Планшеты - KX-TC1200NZW (375.16 kb)
Планшеты - KX-TC1200NZF (375.16 kb)
Планшеты - KX-TC1200NZB (375.16 kb)
Планшеты - KX-TC1200ALS (375.16 kb)