Never touch lampj iwith bare fingers as the oil from youri lhands will shorten lamp life. Also, neverl jmove fixture until lamp has had amplej jtime to cool. Remember, lamps are notj icovered under warranty conditions. | C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Model: Mystic™ SPECIFICATIONS: Lamp: 2 x ZB-64514 120V 300W Power: 110V/60Hz Optics: High Quality Glass Lens Ventilation: Fan Cool

Never touch lamp iwith bare fingers as the oil from your lhands will shorten lamp life. Also, never •move fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a u t i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. MOxtí: mace™ SPECIFICATIONS: Lamp: 2 x ZB-64514 120V 300W, Dimensions: 21.5" x 12" x 11" Weight: 13 lbs. Supply Voltage: 120V Fuse: 7

Stainless steel mounting plate mounts flush on wall or ceiling and is designed for installation on standard electrical box. (Single head remotes are supplied with single gang plate, double head remotes are supplied with three gang plate). UL 924 Listed, CSA Certified. DESCRIPTION Designed to perform in wet locations. Lamp housing is made of corrosion resistant 22 gauge die formed spun aluminum with a powder coat finish and a die cast aluminum, gasketed mounting plate. Sealed swivel and coated la

18 029-13 6X25WMHWH* One Incandescent - Sealed Beam 6 25 029-09 6T6WMHWH One Halogen - Sealed Beam 6 6 029-37 6T8WMHWH One Halogen - Sealed Beam 6 8 029-14 6T10WMHWH One Halogen - Sealed Beam 6 10 029-36 6T12WMHWH* One Halogen - Sealed Beam 6 12 029-15 6T20WMHWH* One Halogen - Sealed Beam 6 20 029-18 6XW54WMHWH One Wedge Base - Incandescent 6 5.4 XW029121 6XW7WMHWH One Wedge Base - Incandescent 6 7.2 XW02988 6XW9WMHWH One Wedge Base - Incandescent 6 9 XW02984 12 Volt Single Metal Weatherproof C

The housing is fully recessed in dry wall or grid ceiling installations. Designer pinchback heads rotate 358° and swivel 90° to 0°. Ideal for commercial and institutional environments where easy recessed installation and minimal maintenance are desired. The RLM Series is a recessed system packaged in an attractive flame-resistant metal housing. It is the unit of choice for installations where a recessed product is desired and the size and cost of emergency lighting must be kept to a minimum wit

Corp. 1478 Old Country Road Plainview, New York, 11803 Tel. 516.501.1400 Fax. 516.501.0429 ELMO Canada Mfg. Corp. 44 West Drive, Brampton, Ontario, L6T 3T6, Canada Tel. 905-453-7880 Fax. 905-453-2391 www.elmocanada.com

Available in wattages up to 400W Pulse Start Metal Halide, Metal Halide and High Pressure Sodium, and up to 70W Compact Fluorescent. Impact Flood offers properly scaled solutions for any floodlighting application. EPA-Effective Projected Area: 2.10 ORDERING INFORMATION SAMPLE NUMBER: MHMM-K-HF-400-MT-LL Lamp Type Fixture Type Mounting Distribution Lamp Wattage Voltage3 I MH=Metal | MM=Impact Type HF=Horizontal HID1 120V Halide Flood K=Knuckle Flood 150=150W 208V HP=High Medium VF=Vertica

2 Pulse Start Metal Halide lamps only. 3 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 4 Multi-Tap is 120/208/240/277V wired 277V. 5 Triple-Tap ballast is 120/277/347V wired 347V. 6 Dual-Tap is 120/277V wired 277V. 7 Compact Fluorescent lamps only, 120-277V with internal fusing. 8 Add as suffix in the order shown. 9 Other finish colors available. Consult your Cooper Lighting representative. 10 Order separ

Reflector kit installation requires knowledge of fluorescent lighting fixture electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. A WARNING! - To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. Reflector kit is not intended to be used for damp or wet locations, A WARNING! - Risk of fire or electrical shock. Fixture wiring, ballast or other electrical parts may be damaged when drilling for in

Retain only a bare channel and channel end caps. Please dispose of lamps and ballast properly and recycle if possible. 3. - With bare channel, now begin installation of new retrofit kit, 4. - Prewire lamp holders / socket Insen lamp wire leads of new ballast inio #953 RS socket wire terminals. This should be completed according to the ballast manufacturer's wiring diagram printed on the ballast label. 5, - Install ballast with sockets attached to leads into channel. Make connections of supply