Войти:
Оценок - 1, средний балл: 3 ( )

Инструкция по эксплуатации Chauvet, модель Q-WASH 260-LED

Производитель: Chauvet
Размер: 450.72 kb
Название файла: d29b5973-de4f-4510-9c9e-61c38471bb04.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


5. Go to MENU > INVERT > DIMMER. 6. Select a fader direction (NORMAL or REVERSE). 7. Go to MENU > INVERT > USE. 8. Select YES to activate the new settings or NO to stop using them. . When in NORMAL, the pan, tilt, and dimmer values will increase as the position of the respective fader increases. . When in REVERSE, the pan, tilt, and dimmer values will decrease as the position of the respective fader increases. When it is necessary to limit the pan or tilt range, you can do the following: 1. Go to MENU > RANGE > P/START. 2. Select the starting point for the limited pan (000~255). 3. Go to MENU > RANGE > P/FINISH. 4. Select the finishing point for the limited pan (000~255). 5. Go to MENU > RANGE > T/START. 6. Select the starting point for the limited tilt (000~255). 7. Go to MENU > RANGE > T/FINISH. 8. Select the finishing point for the limited tilt (000~255). 9. Go to MENU > RANGE > USE. 10. Select YES to activate the new settings or NO to stop using them. Q-Wash 260-LED User Manual Rev. 05 -11- Operation It is possible to select how you can reset the product, whether with the DMX controller or only from the control panel. Reset Control 1. Go to MENU > SPECIAL > RESET. 2. Select DMX or SYSTEM. DMX: Enables the DMX controller to reset the product (Control function). SYSTEM: Restricts the reset function to the control panel.. Move-in Black This option allows you to activate or deactivate the move-in black 3-seconds delay. 1. Go to MENU > SPECIAL > BLACK. 2. Select YES to enable the 3 seconds delay or NO to make the blackout immediate. Power You may use this function to boost the output power for specific, short-term applications. 1. Go to MENU > SPECIAL > POWER. 2. Select NORMAL or HIGH. The product will return to Normal if the LEDs’ temperature becomes too high. Color Settings The COLOR setting determines how the Q-Wash 260-LED generates the white color based on various RGB settings. 1. Go to MENU > SPECIAL > COLOR. 2. Select OFF, RGBTOW, or UC. UC: When the RGB faders are set to “255”, the output matches that of less efficient products (Universal Color). RGBTOW: When the RGB faders are all set to “255”, the resulting output is defined by RGB-W (see MENU > EXTRA > CALIB). OFF: When the RGB faders are all set to “255”, the output is maximum, although the resulting white color may not be balanced. -12- Q-Wash 260-LED User Manual Rev. 05 Operation Fan Control Color Calibration White Calibration This option defines how you can control the fan speed, whether with the DMX controller or only from the control panel. 1. Go to MENU > SPECIAL > FAN. 2. Select DMX or SYSTEM. DMX: Enables the DMX controller to control the fan speed (Control function). SYSTEM: Restricts the control of the fan speed to the control panel.. If necessary, you may adjust the color temperature of each of the macros (White1~11). 1. Go to MENU > EXTRA. 2. Press (PASSWORD) will show on the display. 3. Press (**** will show on the display). 4. Enter the password, as explained in Keylock (CALIB will show on the display). 5. Press (3200K will show on the display). 6. Use or to select another color temperature (3400~10000 K), or press to edit the current temperature. 7. Select RED, GREEN, or BLUE. 8. Select a value (000~255). 9. Repeat for the other colors. You may calibrate the white color shown when the RGB faders are at “255” and the MENU > SPECIAL > COLOR setting is RGBTOW. 1. Go to MENU > EXTRA. 2. Press (PASSWORD) will show on the display. 3. Press (**** will show on the display). 4. Enter the password, as explained in Keylock (CALIB will show on the display). 5. Press (3200K will show on the display). 6. Use or to select RGBW. 7. Select RED, GREEN, or BLUE. 8. Select a value (000~255). 9. Repeat for the other colors. Q-Wash 260-LED User Manual Rev. 05 -13- Operation System Default Edit Custom To default all the product’s parameters to their default values, do the following: 1. Go to MENU > EXTRA. 2. Press (PASSWORD) will show on the display. 3. Press (**** will show on the display). 4. Enter the password, as explained in Keylock (CALIB will show on the display). 5. Use to select DEFAULT. 6. Press (NO will show on the display). 7. Select YES and press to default the product or press

to exit. This function allows you to program up to 255 steps in a single custom program. 1. Go to MENU > EDIT. 2. Press to go to STEP. 3. Press to select a value. The current value (001~255) will show on the LCD. 4. Press or to select a new value. 5. Press to accept the value. 6. Press to go to PAN. 7. Repeat steps “1” through “6” for TILT, SPEED, RED, GREEN, BLUE, DIMMER, STROBE, DIMSPEED, and TIME. 8. Press to go to USE. 9. Select YES to save the settings for this step or NO to delete them. 10. Repeat steps “3” to “8” for the other steps. The product will execute all the steps in the CUSTOM pr...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории