Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Ask them to read instructions completely. CONVENIENCE STROLLER Operating Instructions Important: Read and follow these Safety Rules and Assembly Instructions before operating stroller. If you have any questions concerning the safe use of this product, contact InSTEP, LLC at 1-800-242-6110, M-F, 8:00 a.m. – 5:00 p.m. CST or visit our web site at or email us at info@instep.net before using. Safety Rules: WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. WARNING: Immediately discard any plastic wrapping. WARNING: Never allow children to fold, assemble or disassemble the stroller. WARNING: Maximum weight capacity for the Single stroller is 40 lbs. or 18.2 kg. WARNING: Never place child in stroller on their back with their head forward and feet rearward. WARNING: Avoid serious injury from falling or sliding out. Always use seatbelt. WARNING: Never leave child unattended. WARNING: Never use this stroller with roller skates or in-line skates. WARNING: Never allow stroller to be used as a toy or allow children to give rides to others. WARNING: Never use stroller if it becomes damaged. WARNING: Always be aware of traffic around you when walking. WARNING: Always engage brakes when you stop or when you let go of handle. WARNING: Accessories or parcels placed in or on the stroller may cause it to become unstable. WARNING: Maximum weight for objects in bottom basket is 5 lbs. or 2.2 kg. Excessive weight may cause a hazardous, unstable condition. WARNING: Child may slip into leg openings and strangle. Never use in a reclined carriage position unless T-shield/waist strap placement has been re-adjusted. 1 IMPORTANT We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied with your selection. Great care and effort has been taken, however occasionally problems may occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of problems, or to answer questions, please contact us at either our Toll-Free Customer Service Number or Email us at our number listed below. Service will be quicker if you have your model number (found on the product and box) along with this instruction sheet ready when calling. If you have any questions concerning the safe use of this product, please contact us 1-800-242-6110 press “1” for customer service and then “2” to speak to a representative or Email us at info@instep.net or visit our web site at For Model CS300 Only Tires are shipped deflated, DO NOT OVERINFLATE. Please inflate slowly, with short bursts, to 20-25 PSI maximum. 25 PSI will provide a comfortable ride for your child. Parts List Description Qty. Description Qty. Frame Assembly 1 Rear Wheel Kit consists of: Front Wheel Assembly (Dual wheels) 2 Rear hub/brake cog 2 Rear Wheel 2 Rear axle retaining clip Rear axle cap 2 2 Rear Axle Assembly 1 Rear wheel hub cap 2 Stroller Assembly Instructions Step 1. Unfold Stroller Release storage latch located on side of stroller (Figure A). Grasp frame as shown and open until side latches engage (Figure B). Step 2. Front Wheel Assembly Turn stroller on its side. Slide the front wheel assembly onto one of the front legs. Push until the wheel assembly locks into place. Repeat for other side (Figure C1). Pull firmly on each wheel assembly to ensure that they are securely attached. Note: to remove front wheels, press the tab located beneath wheel assembly (Figure C2). A Storage Latch B C1 C2 Side Latch Front Leg Swivel Lock Wheel Release Tab Front Dual Wheel 2 Step 3. Rear WheelAssembly Turn stroller onto its front as shown (Figure D). Slide the rear axle assembly onto frame as shown (Figure E1). Note: to remove rear axle assembly push up the plastic baffles while pushing in the silver release button pull off the axle assembly (Figure E2). Place rear brake cog on the rear wheel – turn the cog so the grooves line up with the ribs on the wheel sprocket, then push the adapter on. Slide the wheel with brake cog onto the axle (Figure F1). Place the wide end of the retaining clip onto the grooved end of the axle, then press to snap into place (Figure F2). Position the axle cap over retaining clip and then press to snap into place (Figure F3). Place the hubcaps on the wheels – align the hubcap tabs with the holes in the center of the wheel, then press into place (Figure F4). Repeat for other side. D E1 Rear Axle Rear Axle Assembly Rear Axle Assembly Release Buttons Both Sides Rear Axle Rear Axle Assembly Release Button E2 F1 F2 Retainer Clip F3 Retainer Clip Axle Cap F4 Axle Cap Hub Cap 3 Step 4. Mount child napper bar Position bar as shown with tabs on the bottom. (Figure G1) Push in until tabs lock in place.To remove napper bar, push up on bottom tabs and pull off napper bar (Figure G2). G2G1 Napper Bar Release Tab Step 5. Adjust Canopy Push or pull canopy too the desired position. Use Instructions WARNING: Always remove child from stroller before fol...