4 How to Install the Scope 6 How to Sight-In . 14 Making Precise Windage and Elevation Adjustments . 17 What You Should Know About Variable Power Scopes . 25 Using the Illuminated Reticle 33 Changing the Battery . 35 Leupold Means Minimal Maintenance 37 Leupold Product Service 40 The Best Consumer Protection in the Business 41 Francais . 44 Espanol . 48 Deutsch 53 Italiano . 57 3 Part of the Tradition You’re Part of the Tradition In a sport rich in tradition, Leupold® has earned its place as one

NOTE: Settings may vary slightly per individual preferences, air temperature, and atmospheric conditions. NOTE: The side parallax adjustment knob is not to be used to focus the target image. If the reticle is first focused and the parallax then properly set, the image should be clear. EFR scopes and the adjustable objective Leupold EFR (Extended Focus Range) scopes can eliminate parallax for distances as short as 10 meters. Unlike conventional adjustable objective scopes, the focus ring on EFR m

Turn the windage adjustment to the point that it stops moving. 2. Counting the clicks or hash marks, turn it all the way in the other direction. 3. Turn the dial back half the amount of clicks or hash marks counted. 4. Repeat this process for the elevation adjustment. Variable Power Scopes What You Should Know About Variable Power Scopes Leupold variable power scopes allow you to select from a range of magnifications to suit your particular rifle, cartridge, and shooting needs. WARNING: Do not l

Foreign Patents: BX30938-00; CA-Rd./Enr.1999-88472; DE49903766.9; DE69216763T; DE-M9304093.8; DE202005017276U1; EP0540368; GB0540368; IL31338; IT75604; JP1074623; SE55201; TW148948; EM59613; EM393467. This publication may not be reprinted or otherwise reproduced without the expressed written consent of Leupold & Stevens, Inc. Copyright © 2008 Leupold & Stevens, Inc. All rights reserved. The Leupold package is made in part from recycled materials and is 100% recyclable. This includes the black po

1. Check the mount. Make sure the scope is mounted securely to the rifle. Try, with bare hands only, to gently twist the scope in the rings or see if anything moves when you jiggle it. If there is any movement, retighten the mounting system according to mounting instructions. 2. Make sure the action of your rifle is properly bedded in the stock, and that all receiver screws are tight and have been tightened in the sequence recommended by the manufacturer. A loosely fitted stock can cause changes

Remember that aiming uphill typically reduces eye relief. Wearing hunting/shooting specific clothing is recommended as this may alter eye relief considerations slightly. WARNING If a scope is mounted too far to the rear, the eyepiece can injure the shooter’s brow. Shooting at an uphill angle also increases this hazard because it shortens the distance between the brow and the rear of the scope. For this reason, Leupold scopes are engineered to provide generous eye relief. Therefore, when mounting

Figure A Target as seen through the bore. The final step: three-shot groups Whichever bore-sighting method you’ve used, the next steps are the same on the firing range. To ensure reliable results, always fire from a rested position when performing these steps. (If you are using an adjustable objective or side focus model scope, perform any correction for parallax before continuing, as explained in “Understanding Parallax” on pages 29-32.) 1. Fire a shot or two. 2. If you are several inches off c

C Table of Contents Using Your Leupold Green Ring Binocular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Warranty Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 The Leupold Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Francais . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Espanol . .