Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
. Whenever there is a sharp temperature difference between the instrument’s storage and usage locations allow the instrument to adjust to the ambient for an hour or more before use. Be sure to protect the instrument from the sun if the location is subject to intense direct sunlight. . During surveys for which the survey precision or atmospheric measurement method has been defined measure the atmospheric temperature and pressure separately and enter those values rather than using the Automatic Atmospheric Correction function. . The battery should be charged approximately once per month if the instrument is to be stored for an extended period of time. The instrument should also be removed from its case occasionally and aired out. . In addition to these precautions, be sure to handle the instrument properly at all times following the descriptions given in the various sections of this manual to assure safe and proper measurements. [Transporting and Carrying the Instrument] . Be careful to protect this instrument from shock of impact and excessive vibration which may result in damage during transportation and shipment. . When transporting the instrument, always put it in the case and wrap shock- absorbing material around it and be sure it is handled as “FRAGILE”. [Checks and Repairs] . Always check the instrument before beginning work and check that the instrument is maintaining the proper level of precision. Pentax bears absolutely no responsibility for damages due to survey results obtained from surveys conducted without an initial instrument check. . Never disassemble the instrument, battery or charger even if you do detect an abnormality as there is a risk of fire or electric shock due to short-circuit. If you think the product requires repair, contact the retail outlet where you purchased it or an authorized repair site. 5 PENTAX R-300 (p01-19) 10/30/02 11:20 AM Page 6 CONTENTS PRECAUTIONS REGARDING SAFETY Safety Precautions ............................................................................................ 1 Usage Precautions ............................................................................................ 3 1 BEFORE USING THE INSTRUMENT 1-1 Names of Parts ................................................................................... 9 1-2 Unpacking and Packing .................................................................... 11 1-3 Standard equipment ......................................................................... 11 1-4 Attaching and Charging the Battery ................................................. 12 2 DISPLAY AND KEYBOARD 2-1 Display and Keyboard ...................................................................... 16 2-2 Operation Key ................................................................................... 16 2-3 Function Key ..................................................................................... 17 2-4 Alphanumeric Input .......................................................................... 19 2-5 LD Point, Laser pointer ..................................................................... 19 3 PREPARATION FOR SURVEYING 3-1 Centering and Leveling of the Instrument ........................................ 20 3-2 Laser plummet .................................................................................. 20 3-3 Optical plummet (Option) ................................................................. 22 3-4 Leveling with Circular vial ................................................................. 23 3-5 Leveling with Electronic vial ............................................................. 23 3-6 Eyepiece Adjustment ........................................................................ 25 3-7 Target Sighting ................................................................................. 26 3-8 Attachment and Detachment of Tribrach .......................................... 32 4 TURNING THE POWER ON 4-1 Turning the Power On and Off .......................................................... 33 4-2 Adjusting LCD Contrast .................................................................... 34 4-3 Adjusting Illumination Brightness ..................................................... 35 4-4 Adjusting Reticle Illumination ........................................................... 35 5 ANGLE MEASUREMENT 5-1 Measuring an Angle ......................................................................... 36 5-2 Resetting the Horizontal Angle to 0 ................................................. 37 5-3 Holding the Horizontal Angle ............................................................ 37 5-4 Inputting an Arbitrary Horizontal Angle ............................................ 38 5-5 Displaying the % Slope of the Vertical Angle ................................... 40 5-6 Changing the Horizontal Angle from Clockwise to Counterclockwise ................................................ 41 6 PENTAX R-300 (p01-19) 10/30/02 11:20 A...
Эта инструкция также подходит к моделям:Оптические приборы - R-315(N) (875.66 kb)
Оптические приборы - R-315(N) (875.66 kb)
Оптические приборы - R-322(N) (875.66 kb)
Оптические приборы - R-323(N) (875.66 kb)