Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
So, do not load oiled clothes. • Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the washer. • When the machine runs high temperature, the front door may be very hot. Don’t touch it. • To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. • When unplugging power cord, do not pull out by grasping the cord. Otherwise, the power cord may be damaged. • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. • Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse. • When a product was under water, Please call service center. There is a risk of electric shock and fire. • Appliance connected to the water mains using new hose-sets. Old hose-sets should not be reused. • To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property, personal injury or death. • Do not push down the door excessively, when washer door open. This could topple over the washer. SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance. • Do not use an adapter this will defeat the grounding plug. • If you don’t have the proper outlet, consult an electrician. WARNING : Improper connection of the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician. 4 5 Spanner 5 Spanner 1% Rinse Tem p. 40°C 3 1:15Resttid Washing (For detergent and fabric softener) Drain hose Transit bolts Adjustable feet S pecifications Power plug • If the supply cord is damaged, it must be replaced by the Drawer manufacturer or its service agents or a similarly qualified person in order to avoid a hazard. Control panel Drum Drain pump filter Door Drain plug Lower cover cap ¦ Name : Front loading washing machine ¦ Power supply : 220 - 240 V~, 50 Hz ¦ Size : 600 mm(W) 640 mm(D) 850 mm(H) ¦ Weight : 70 kg ¦ Max.Watt : 2200W (Wash) / 1100W (Steam) ¦ Wash capacity : 11 kg ¦ Water consumption : 77 l (7 l / kg) ¦ Permissible water pressure : 100 ~ 1000 kPa (1.0 ~ 10.0 kgf / cm2) The appearance and specifications may vary without notice to improve the quality of the unit. ¦ Accessories 6 I nstallation ¦ Removing packing Base Packing Washer Spanner 1. Remove the cardboard box and styrofoam packing. 2. Lift the washing machine and remove the base packing. 3. Remove the tape securing the power supply cord and drain hose. 4. Remove the inlet hose from the drum. 1. Unscrew the 3 bolts with the spanner supplied. 2. Take out the 3 bolts along with the rubber bungs by slightly twisting the bung. 3. Close the holes with the caps supplied. Keep the transit bolts for future use. To prevent internal damage during transport, the 3 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction. ¦ Removing transit bolts Keep the spanner provided for future use. Transit bolt Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children. Warning I nstallation ¦ Installation place requirement Laundry Tub Washer approx. 2cm Drain Hose Positioning Location • Level floor : Allowable slope under entire washer is 1° • Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance. • Additional Clearance : For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls. • Install the washer on a flat hard floor. • Make sure that air circulation around the washer is not impeded by carpets, rugs, etc. • Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer. • If it is impossible to avoid positioni...