Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Sony, модель VGN-A195HP

Производитель: Sony
Размер: 1.38 mb
Название файла:
Язык инструкции:
Перейти к скачиванию



Фрагмент инструкции


! Do not place the memory module in places subject to: - Heat sources such as radiators or air ducts, - Direct sunlight, - Excessive dust, - Mechanical vibration or shock, - Strong magnets or speakers that are not magnetically shielded, - Ambient temperature of more than +35°C or less than +5°C, - High humidity. * Depending on the configuration of your computer, the number of available slots can vary. . Removing and installing a memory module (PCG-TR series) (page 108) . Removing and installing a memory module (VGN-A series) (page 111) Removing and installing a memory module (PCG-TR series) To change or add a memory module, proceed as follows: 1Shut down your computer and disconnect all peripheral devices. 2Unplug the computer and remove the battery pack. 3Wait until the computer cools down. 4Unscrew the central screw at the bottom of your computer. 5Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity. 6Remove the memory module: . Pull the tabs in the direction of the arrows. The memory module is released. . Pull the memory module in the direction of the arrow. 7Remove the new memory module from its packaging. 8Install the memory module. Be careful not to touch the other components on the motherboard. . Slide the memory module into the slot. . Snap the connectors into place when the board is correctly seated. . Check if there is white sticker on the memory module. The white sticker should be on the upperside. 9Close the module cover, then tighten the screw on the bottom of the computer. 10Reinsert the battery and turn the computer on. Removing and installing a memory module (VGN-A series) To change or add a memory module, proceed as follows: 1Shut down your computer and disconnect all peripheral devices. 2Unplug the computer and remove the battery pack. 3Wait until the computer cools down. 4Unscrew the central screw at the bottom of your computer. 5Remove the memory module: . Pull the tabs in the direction of the arrows. The memory module is released. . Pull the memory module in the direction of the arrow. 6Unscrew the 2 screws next to the memory slot. 7Turn your computer around and lift the cover. 8 Introduce a sharp object ( such as a fine screwdriver) between the keys indicated on the picture (1) and push gently upwards. 9Lift the keyboard from the LCD display side and gently turn it over the touchpad. Be careful not to detach the cable when lifting the keyboard. 10Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity. 11Remove the memory module: . Pull the tabs in the direction of the arrows. The memory module is released. . Pull the memory module in the direction of the arrow. 12Remove the new memory module from its packaging. 13Install the memory module. Be careful not to touch the other components on the motherboard. . ...

Эта инструкция также подходит к моделям:
Ноутбуки - PCG-TR5MP (1.38 mb)
Ноутбуки - VGN-A115B (1.38 mb)
Ноутбуки - VGN-A115S (1.38 mb)
Ноутбуки - VGN-A117S (1.38 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории