Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Mobile Computing Mobile Computing Charging the batteries Leave the power connected, and the battery should begin charging after a few minutes. HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity. Charging the RTC battery Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and BIOS memory used to store your computer’s configuration settings. When fully charged it maintains this information for up to a month when the computer is powered off. The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERY BAD CHECKSUM (CMOS) CHECK SYSTEM To recharge the RTC battery, plug in the computer and leave it turned off for at least 24 hours. NOTE The above error message may vary by computer model. The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working. Mobile Computing Mobile Computing Monitoring battery power NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock. The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored. Monitoring battery power The battery light indicates the battery’s current charge. The indicator light: . Glows green when the battery is fully charged . Glows amber while the battery is being charged . Does not glow if the external power source is disconnected or if the battery is completely discharged Determining remaining battery power NOTE Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. 1 Click Start, Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Management icon. Mobile Computing Mobile Computing Monitoring battery power The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge. 3 Click the Battery Power Meter tab. Sample Toshiba Power Management Battery Power Meter tab TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the r...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite A70-S2482TD (2.3 mb)
Ноутбуки - Satellite A70-S249 (2.3 mb)
Ноутбуки - Satellite A70-S2491 (2.3 mb)
Ноутбуки - Satellite A70-S2492ST (2.3 mb)