|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
600. Lines –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) Phone jack (unbalanced)+10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) ST CH INPUT (CHs 9/10, 11/12) — 10k. 600. Lines –30 dBu (24.5 mV) –10 dBu (245 mV) +10 dBu (2.45 V) Phone jack (unbalanced) RCA pin jack CH INSERT IN (CHs 1-4) — 10k. 600. Lines –20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) TRS phone Jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) RETURN (L, R) — 10k. 600. Lines –12 dBu (195 mV) +4 dBu (1.23 V) +24 dBu (12.3 V) Phone jack (unbalanced) 2TR IN (L, R) — 10k. 600. Lines –26 dBV (50.1 mV) –10dBV (0.316V) +10dBV (3.16 V) RCA pin jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum level. (All faders and level controls are at their maximum position.) ¦ Output Specifications Output Connectors Output Impedance Appropriate Impedance Nominal Level Max. before clipping Connector Specifications STEREO OUT (L, R) 75. 600. Lines +4dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) Phone Jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) GROUP OUT (1, 2) 150. 10k. Lines +4dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) EFFECT/AUX (AUX1, 2*) SEND 150. 10k. Lines +4dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) CH INSERT OUT (CHs 1-4) 75. 10k. Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) REC OUT (L, R) 600. 10k. Lines –10 dBV (0.316 V) +10 dBV (3.16 V) RCA pin jack MONITOR OUT (L, R) 150. 10k. Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) PHONES OUT 100. 40. Phones 3 mW 75 mW Stereo phone jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C) 68 MG124CX/MG124C Owner’s Manual Specifications Reference Specifications Reference Dimensional Diagrams 346.2 436.6 86.1 79.6 2 433.9 Unit: mm MG124CX/MG124C Owner’s Manual 69 Specifications Reference ¦ Block Diagram and Level Diagram HAHA HPF COMP 3-Stage EQ BABA SUMSUM BA HA BABA HPF HA HA 3-Stage EQ3-Stage EQ2-Stage EQ HAINV 2-Stage EQ INVINVINV SUMSUM SUMSUM SUMSUM SUMSUMBABABABA DRDR INVINV INV INV BABA BABA MODELMG124CXMG124C AUXAUX1 EFFECTAUX2 FUNCTION NAME CH Fader [0dBu] [0dBu] [0dBu] [0dBu] [0dBu][0dBu][0dBu] [–6dBu][–6dBu] [0dBu] [–6dBu] [0dBu] [0dBu] [0dBu] TO ST [–10dBu] [–16dBu] [0dBu] [–10dBu]STEREO Fader STEREO/GROUP LED METERLED METERMONITOR/PHONES GROUP Fader[0dBu][–6dBu][–6dBu][0dBu] [0dBu][0dBu] [0dBu][0dBu] PREPREPRE PFL +15VPANBAL/PANBAL G1-2ST ST PFL +15V+15V PFL +15V PFL ON YE 2TR IN AUXPARAMETER PROGRAM(1-16) EFFECT RETURN DIGITALEFFECT(DSP) only MG124CX FOOT SWEFFECT ON/OFFCH IN LINE Gain:Min [+10dBu]CH IN MIC Gain:Min [–16dBu] Clip Level Clip LevelCH LevelST CH Level[Nominal:–10dB] RETURN2TR IN[Nominal:–6dB] GROUP Fader[Nominal:–10dB]MONITOR MIX *1GROUP OUT [+4dBu] STEREO OUT [+4dBu] STEREO Master[Nominal:–10dB] MONITOR/PHONES[Nominal:–16dB] PHONES [3mW @ 40ohms]MONITOR OUT [+4dBu] REC OUT [–7.8dBu] AUX SEND *1[Nominal:–6dB]AUX SEND *1 [+4dBu] CH AUX *1[Nominal:–6dB]ST CH AUX *1DSP AUX[Nominal:–6dB] EFFECT RETURN[Nominal:–10dB] ST CH IN[–10dBu] RETURN [+4dBu]2TR IN [–10dBV][–7.8dBu]Clip Level Clip Level Clip Level Clip Level Clip LevelClip Level CH IN LINE Gain:Max [–34dBu]CH IN MIC Gain:Max [–60dBu] ST CH IN LINE Gain:Min [+10dBu]ST CH IN MIC Gain:Min [–16dBu]ST CH IN LINE Gain:Max [–34dBu]ST CH IN MIC Gain:Max [–60dBu] +20dBu+30dBu0dBu+10dBu–20dBu–10dBu–30dBu TO STEREO/TO MONITOR [0dBu] [0dBu] [0dBu] [0dBu] [0dBu] [0dBu][0dBu][0dBu] [–6dBu] AUX *1 AUX SEND *1EFFECT SEND *1 AUX SEND *1EFFECT SEND *1AUX *1EFFECT *1[–6dBu] [–10dBu] [0dBu][–14dBu] LOROIN [–14dBu][–14dBu][–14dBu][0dBu] G1-2STG1-2ST AUX *1 STEREO L STEREO R GROUP 1 GROUP 2 PFL L PFL R PFL CTRL EFFECT *1 EFFECT *1 EFFECT *1[–14dBu][–14dBu] [–10dBu] CH Fader[–10dBu] ON YEYE RE LOW MID HIGH LOW MID HIGH LOW HIGH [+4dBu] GROUP OUT[+4dBu]ST OUT[–10dBV][–7.8dBu]REC OUT 12LR [+4dBu] [+4dBu][+4dBu]MONITOR OUT[3mW @ 40ohms]PHONES LR LR CH Fader[-10dBu] [0dBu] [16 to 60dB]GAIN Trim [–60 to –16dBu][0dBu][–34 to +10dBu]MIC[–60 to –16dBu]MIC [–34 to +10dBu] [–34 to +10dBu] HPF [–34 to +10dBu]LINE RLINE L/MONOST CH INPUT(CH9/10, 11/12)[–10dBu]2TR IN[–10dBV][–7.8dBu]RETURN[+4dBu] LRL/MONORLR (CH5/6, 7/8)ST CH INPUT(CH1 to 4)CH INPUT [6 to 50dB]GAIN Trim LINEINSERTI/O ONYE RE +48V HPF TH+GAIN PHANTOMRE PEAK ON PEAK AUX *1AUX *1 Specifications Reference ¦ Block Diagram and Level Diagram HAHA HPF COMP 3-Stage EQ BABA SUMSUM BA HA BABA HPF HA HA 3-Stage EQ3-Stage EQ2-Stage EQ HAINV 2-Stage EQ INVINVINV SUMSUM SUMSUM SUMSUM SUMSUMBABABABA DRDR INVINV INV INV BABA BABA MODELMG124CXMG124C AUXAUX1 EFFECTAUX2 FUNCTION NAME CH Fa...
Эта инструкция также подходит к моделям:Музыкальные инструменты - MG124CX (1.42 mb)