Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Музыкальные инструменты - M2500-48C (128.49 kb)
Музыкальные инструменты - M2500-48C (128.49 kb)
Музыкальные инструменты - M2500-48C (4.29 mb)
Фрагмент инструкции
Consult your dealer for repair. Using the unit in this condition is a fire and electrical shock hazard. • Should this power supply be dropped or the cabinet be damaged, turn the power switch off, remove the power plug from the AC outlet, and contact your dealer. If you continue using the unit without heeding this instruction, fire or electrical shock may result. • If the power cord is damaged (i.e., cut or a bare wire is exposed), ask your dealer for a replacement. Using the unit with a damaged power cord is a fire and electrical shock hazard. • Do not modify the unit. Doing so is a fire and electrical shock hazard. • This unit is heavy. Use two or more people to carry it. • Hold the power cord plug when disconnecting it from an AC outlet. Never pull the cord. A damaged power cord is a potential fire and electrical shock hazard. • Do not touch the power plug with wet hands. Doing so is a potential electrical shock hazard. • Use only the included power supply for this unit. Using other types may be a fire hazard. Operating Notes • The digital circuits of this unit may induce a slight noise into nearby radios and TVs. If noise occurs, relocate the affected equipment. • Using a mobile telephone near this unit may induce noise. If noise occurs, use the telephone away from the unit. • XLR-type connectors are wired as follows: pin 1: ground, pin 2: hot (+), and pin 3: cold (–). • Insert TRS phone jacks are wired as follows: sleeve: ground, tip: send, and ring: return. • The performance of components with moving contacts, such switches, rotary controls, faders, and connectors, deteriorates over time. The rate of deterioration depends on the operating environment and is unavoidable. Consult your dealer about replacing defective components. Keep This Manual For Future Reference. M2500—Owner’s Manual iii Introduction Thank you for purchasing the Yamaha M2500 mixing console. The M2500 is a highly cost- effective mixing console that features functionality such as scene memory, PAN control that is switchable between LR/LCR, and GROUP/AUX FADER FLIP switches. In order to take full advantage of the M2500’s functionality and ensure trouble-free use, please read this manual carefully. Note: • This manual assumes that you have an understanding of basic mixing console operation and terminology. • The M2500 series includes five models: M2500-24, M2500-32, M2500-40C, M250048C, and M2500-56C. This manual bases its explanation on the M2500-24. Differences in the specifications of each models are given in curly brackets { }. Contents Features of the system.............................2 Control panel..........................................3 Input channel section.........................................3 GROUP/AUX master section.............................9 GROUP/AUX FLIP switch...............................14 Stereo/monaural master section ......................16 Matrix section...................................................18 Monitor section ................................................19 Talkback/oscillator section...............................21 Meter select section...........................................22 Control section .................................................22 Meter bridge......................................................24 Rear panel.............................................25 Monaural input channel input/output jacks... 25 Stereo input channel input/output jacks.........26 Master section input/output jacks ................... 27 The Scene Memory function .................30 What is scene memory?....................................30 Modes of the scene memory function.............30 Operation in Normal mode .............................31 Check mode operation.....................................32 Utility mode procedures...................................34 Control change table ........................................36 Mute groups......................................................37 About the local control circuit.........................38 Error messages......................................39 Specifications........................................40 General specifications ...................................... 40 Input/output characteristics ............................ 41 Other................................................................. 42 Dimensions........................................... 43 MIDI data format..................................44 MIDI Implementation Chart..................45 M2500—Owner’s Manual 1 Features of the system • The M2500-24 {32/40C/48C/56C} provides 24 {32/40/48/56} monaural input modules and four stereo input modules. It also provides 14 AUX outputs, eight group outputs, stereo output, and monaural output, for a generous total of 25 output buses. The M2500 is ideal for a wide range of applications from use as a main PA mixer to use in installed systems. • Eight independent matrix outputs are provided. The GRP/AUX, STEREO, and MONO/C channel output sign...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M2500-24 (1.65 mb)
Музыкальные инструменты - M2500-32 (1.65 mb)
Музыкальные инструменты - M2500-40C (1.65 mb)
Музыкальные инструменты - M2500-56C (1.65 mb)