Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Музыкальные инструменты - M2500-24 (128.49 kb)
Музыкальные инструменты - M2500-24 (128.49 kb)
Фрагмент инструкции
ST LRMONOMONORL STONON MASTERINPUT from CPU MONO/C R L ST OUT ST OUT +4dB +4dB +4dB MONO/C ST R ST L 0dB INSERT I/O INSERT I/O 0dB 0dB INSERT I/O ON PFL MASTER L+R LEVEL ST LRMONOSUB IN RLLR MONO/CSTEREO MATRIX MATRIX LR MONO/CSTEREOG8/A14G7/A13G6/A12G5/A11G4/A10G3/A9G2/A8G1/A7 ON CHECK ON/EDIT Control AFL ON PHONES from CPU ON CHECK ON/EDIT Control AFL 7 3 6 1 5 2 8 4 MONITOR INPUT MASTER (PFL) PFL AFL MATRIX MONITOR OUT +4dB R MONO/C M2500—Owner’s Manual 17 The M2500 provides an eight channel matrix section that allows the output signals from the G1/A7–G8/ A14 section, the output signals from the stereo/mon- aural master section, and the input signals from the SUB IN MATRIX jacks to be mixed at a desired level. Matrix 1–8 are output individually from MATRIX OUT jacks 1–8 ( The M2500 provides an eight channel matrix section that allows the output signals from the G1/A7–G8/ A14 section, the output signals from the stereo/mon- aural master section, and the input signals from the SUB IN MATRIX jacks to be mixed at a desired level. Matrix 1–8 are output individually from MATRIX OUT jacks 1–8 ( for foldback or individual monitor systems. jacks. If the PFL switches of all input channels are off, turning this AFL switch on will allow you to monitor the output signal of the corresponding matrix from the MONITOR OUT/PHONES jacks. Use the MAS- TER PFL switch of the monitor section to switch the monitor signal between pre/post-fader (LEVEL con- trol). MATRIX 1 LEVEL 0 10 MONO/C ST 0 R 0 L 0 SUB IN R 0 L 0 G8 / A14 0 G7 / A13 0 G6 / A12 0 G5 / A11 0 G4 / A10 0 G3 / A9 0 G2 / A8 0 G1 / A7 0 AFLON 1 2 3 MATRIX Control panel STEREO MONO/C 4 G1/A7G2/A8G3/A9G4/A10G5/A11G6/A12G7/A13G8/A14 LR SUB IN LR 4 5 7 MONITOR ST LRMONOMONORL ST PFL AFL ONON (PFL) SUB IN R to METER INPUT 1-8 MATRIX OUT +4dB ST MASTER LRMONO ON AFL LEVEL MONO/C SUB IN L ST R ST L G8/A14 G7/A13 G2/A8 G1/A7 G7/A12 G7/A11 G7/A10 G7/A9 MATRIX SUB IN +4dB R L 5 7 6 1 2 3 6 ASUB IN L/R control These adjust the signal levels that are input to the matrix from the rear panel SUB IN MATRIX jacks (page 28). The “” position is nominal level (0 dB). B ST L/R controls When the MATRIX switch of the STEREO section (page 16) is on, these controls adjust the level of the signal that is sent from the STEREO section to the matrix. The “” position is nominal level. C MONO/C control When the MATRIX switch of the MONO/C section (page 16) is on, this control adjusts the level of the signal that is sent from the MONO/C section to the matrix. The “” position is nominal level. Matrix section D G1/A7–G8/A14 controls When the MATRIX switches of the G1/A7–G8/A14 section (page 11) are on, these controls adjust the level of the signal that is sent from the corresponding GRP/AUX OUT to the matrix. The “” position is nominal level. E LEVEL control This adjusts the final output level of the matrix. The “” position is nominal level. F ON switch This switches the output of the matrix on/off. G AFL switch Using this switch, the signal of the matrix can be monitored from the MONITOR OUT/PHONES 18 M2500—Owner’s Manual Control panel Control panel n In this section you can select the signal that will be monitored from the MONITOR OUT jacks and the PHONES jacks. Monitor signal priority order There is a priority order for the signals that can be selected as monitor sources. While a higher priority signal is being monitored, it is not possible to monitor signals of a lower priority. Multiple monitor sources can be selected simultaneously if they are all of the same priority level. The priority order of the various monitor sources is shown below. Priority order 1 • Pre-fader signal of a monaural input channel (PFL switch) • Pre-fader signal of a stereo input channel (PFL switch) When a PFL switch is turned on, the pre-fader signal of that input channel can be monitored from the MONITOR OUT/PHONES jacks. Priority order 2 • Pre/post-fader signals of the AUX 1–6 section (AFL switch) • Pre/post-fader signals of the A7/G1–A14/G8 section (AFL switch) • Pre/post-fader signals of the G1/A7–G8/A14 section (AFL switch) • Pre/post-fader signals of the STEREO section (AFL switch) • Pre/post-fader signals of the MONO/C section (AFL switch) • Pre/post-fader signals of the matrix section (AFL switch) When a AFL switch of one of these sections is turned on, the pre/post-fader signal of the corresponding section can be monitored from the MONITOR OUT/ PHONES jacks. Priority order 3 • ST OUT (L, R, MONO/C) output signals If all PFL and AFL switches of priority orders 1 and 2 are off, the ST OUT (L, R, MONO/C) output signal can be monitored from MONITOR OUT L, R, and MONO/C. The PHONES jack will monitor the ST OUT (L/R) output signal. 1 PHONES L+R INPUT MASTER MASTER PFL ON MONITOR PHONES 0 10 LEVEL 0 10 2 3 4 5 6 7 8 AINPUT indicator If even one of the input channel PFL switches are on, this indicator will light. When this indicator is lit, you are monitoring a signal of priority order 1. B MASTER indicator If even o...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M2500-32 (1.65 mb)
Музыкальные инструменты - M2500-40C (1.65 mb)
Музыкальные инструменты - M2500-48C (1.65 mb)
Музыкальные инструменты - M2500-56C (1.65 mb)