Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Gemini, модель PDT-6000

Производитель: Gemini
Размер: 370.65 kb
Название файла: fe1446ec-3382-4df1-a100-35b84fd60bbd.pdf
Язык инструкции:enesfrde
Перейти к скачиванию



Фрагмент инструкции


PITCH CONTROL (23) automatically disengages when the QUARTZ LOCK (25) is activated. 2. When the QUARTZ LOCK (25) is off, you can adjust the PITCH CONTROL (23). When you move the PITCH CONTROL (23) off center, the tempo can vary +/- 4%, +/- 8%, +/- 16% or +/- 35%, depending on which RANGE BUTTON (31) you select. These are lighted buttons and will light up when pressed. * Note: If your speed is 33 1/3 rpm and you adjust the tempo to +35% your speed will be exactly 45 rpm. Conversely, if your speed is 45 rpm and you adjust the tempo to -35% your speed will be exactly 33 1/3 rpm. 3. By adjusting the KEY CONTROL (32) you can raise or lower the key of the music. The key can vary +/- 4%, +/- 8%, +/- 16% or +/- 35%, depending on which RANGE BUTTON (31) you select. 4. Push the QUARTZ LOCK BUTTON (25) to bring the speed back to exactly 33 1/3, 45 or 78 RPM when the PITCH CONTROL (23) is positioned off center. Disengaging the QUARTZ LOCK (25) will bring the platter speed back to the original setting. 5. When you press the MASTER TEMPO BUTTON (33) you will be able to adjust the tempo of the record using the PITCH CONTROL (23). The KEY CONTROL (32) will be de-activated. The key of the music will be automatically adjusted to remain in the original key of the record, as you vary the tempo. The MASTER TEMPO LED (35) will light when the MASTER TEMPO BUTTON (33) is pressed. 6. The KEY ON BUTTON (34), when pressed allows you to adjust the PITCH CONTROL (23) and KEY CONTROL (32) independently of each other. The KEY ON LED (36) will light when the KEY ON BUTTON (34) is pressed. * Note: The MASTER TEMPO BUTTON (33), KEY ON BUTTON (34), PITCH CONTROL (23), and KEY CONTROL (32) can only be used through the LINE OUTPUT JACKS (40) and DIGITAL OUTPUT JACK (42). They cannot be used when the PHONO/LINE SWITCH (41) is set to PHONO. 7. The PLATTER (2) is equipped with a STROBE RPM INDICATOR STRIP (26) and the POWER SWITCH (16) contains built in STROBE LIGHTS (27). When the PLATTER (2) is spinning, the STROBE LIGHTS (27) illuminate the STROBE RPM INDICATOR STRIP (26). The bottom row of dots will appear to be stationary when the pitch is -3.3%. The second row of dots from the bottom will appear to be stationary when the speed is exactly 33 1/3, 45 or 78 RPM depending on which SPEED SELECTOR BUTTONS (18) are pushed. The third row of dots from the bottom will appear to be stationary when the pitch is +3.3%. The top row of dots will appear to be stationary when the pitch is +7.2%. USING THE REVERSE BUTTON: 1. Press the REVERSE BUTTON (29) to reverse the rotation of the PLATTER (2) (the REVERSE LED (30) will light while in reverse mode). Press the REVERSE BUTTON (29) a second time to return to normal play. DIGITAL DISPLAY: 1. The DIGITAL DISPLAY (20) indicates PITCH PERCENTAGE & BPM. The BPM/PITCH BUTTON (37) allows you to select what you would like displayed, either the PITCH PERCENTAGE or the BPM. -5- ARM-LIFT HEIGHT ADJUSTMENT: If the pre-adjusted distance that the CUE LEVER (19) raises the stylus off the record surface is inadequate, it can be adjusted by turning the ARM-LIFT HEIGHT ADJUSTMENT SCREW (28) while simultaneously pushing down on the TONE ARM (6). Clockwise rotation of the screw will decrease the distance and counter-clockwise rotation will increase the distance. BRAKE AND TORQUE CONTROLS: The adjustable BRAKE BUTTON (38) allows you to vary the speed at which the PLATTER slows down to a stop. You can adjust the length of slowing down by turning the BRAKE BUTTON (38) clockwise or counter-clockwise. You can then press the button in to keep it held in that position. Press it again and it will pop up, so you can adjust it again. The adjustable TORQUE BUTTON (39) allows you to vary the speed at which the PLATTER speeds up. You can adjust the length of speeding up by turning the TORQUE BUTTON (39) clockwise or counter-clockwise. You can then press the button in to keep it held in that position. Press it again and it will pop up, so you can adjust it again. OUTPUT JACKS: The PHONO/LINE OUTPUT JACKS (40) are RCA type jacks. They can be assigned as LINE output or PHONO output by using the PHONO/ LINE SWITCH (41). The DIGITAL OUTPUT JACK (42) allows you to connect the PDT-6000 turntable to a mixer, recorder, etc. that accepts a digital signal. SPECIFICATIONS: TURNTABLE SECTION: Type...................................................Quartz Direct Drive Manual Turntable Drive Method................................................................................Direct Drive Motor......................................................................Brushless DC Motor 18V Platter............................................Aluminum Diecast 13” (332mm) Dia. Speed...............................................................................33 1/3, 45 or 78 RPM Starting Torque..............................................................................3.0 kg/cm Build-up Characteristics..............................


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории