Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
2. Using a network-connected machine 10 Wired network setup Wired network setup Find the machine’s MAC address from the Network Configuration Report Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 9) and enter it (see "Printing a network configuration report" on page 9) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 0015992951A8. Select Apply, then OK, and OK again. The machine will automatically print the Network Configuration 6 5 Report. Quit Safari. 7 IPv4 configuation using SetIP (Linux) Before using the SetIP program, disable the computer firewall from System Preferences or Administrator. The following instructions may vary from your model or operating systems. Open /opt/Samsung/mfp/share/utils/. 1 Double-click the SetIPApplet.html file. 2 Click to open the TCP/IP configuration window. 3 Enter the machine’s new information into the configuration window. In 4 a corporate intranet, you may need to have this information assigned by a network manager before proceeding. 2. Using a network-connected machine 11 Installing driver over the network Read and check The software End User License Agreement and I have 3 • Some features and optional goods may not be available depending reviewed and accept the term of the License Agreement. Then, click on model or country (see "Features by models" on page 5). Next. • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 18). • You can install the printer driver and software when you insert the software CD into your CD-ROM drive. For windows, select the printer driver and software in the Select Software to Install window. Windows Make sure that the machine is connected to the network and powered 1 on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 9). Insert the supplied software CD into your CD-ROM drive. 2 Select Network connection on the Printer Connection Type screen. 4 If the Connect Device window appears, check that the machine is 5 connected to your network. Then, click Next. The firewall software might be blocking network communication. Before connecting the device to the network, disable the computer’s firewall. 2. Using a network-connected machine 12 Installing driver over the network Installing driver over the network The searched machines will be shown on the screen. Select the one you 6 wish to use and click OK. Follow the instructions in the installation window. 7 Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window. Command-line Parameters Following table shows commands that can be used in the command window. Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. Command- line Definition Description /s or /S Starts silent installation. Installs machine drivers without prompting any UIs or user intervention. Command- line Definition Description /p”
Принтеры - CLP-360 (11.77 mb)
Принтеры - CLP-362 (11.77 mb)
Принтеры - CLP-363 (11.77 mb)
Принтеры - CLP-364 (11.77 mb)