Оценок - 3, средний балл: 4.3
(
)
)
|
Фото и характеристики Samsung NC241 |
Фрагмент инструкции
Connecting a Stereo Cable .. Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC. RGB IN AUDIO IN 3 Connecting and Using a Source Device 3.2.2 "Windows Driver" Installation • You can set the optimum resolution and frequency for this product by installing the corresponding drivers. • An installation driver is contained on the CD supplied with the product. 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Click "Windows Driver". 3 Follow the instructions given on the screen to proceed with installation. 4 Select your product model from the list of models. 5 Go to Display Properties and check that the resolution and refresh rate are appropriate. Refer to your Windows OS manual for further details. 673 Connecting and Using a Source Device 3 3 Connecting and Using a Source Device 3.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. NC191 NC241 AUTO 1280 x 1024 60Hz The optimal resolution for this monitor is as follows: Follow the above settings to set the resolution. English 1920 x 1080 60Hz The optimal resolution for this monitor is as follows: Follow the above settings to set the resolution. English 1 Press [ ] to move to the language you want and press [ ]. 2 To hide the information message, press [ MENU]. • If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again. • The optimum resolution can also be selected in Control Panel on your PC. 683 Connecting and Using a Source Device 3 3 Connecting and Using a Source Device 3.2.4 Changing the Resolution Using a PC • Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. • The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings and change the resolution. 123**** **** ********** Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. 1234*********** *********** 693 Connecting and Using a Source Device 3 3 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 1234 703 Connecting and Using a Source Device 4 4 Screen Setup Configure the screen settings such as brightness and color tone. 4.1 Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when Bright is set to Dynamic Contrast mode. MAGIC 4.1.1 Configuring Brightness 1 Press any button on the front of the product to display the OSD guide. Next, press [ MENU] to display the corresponding me...
Эта инструкция также подходит к моделям:Мониторы - NC241-T (4.6 mb)
Мониторы - NC191-T (4.6 mb)
Мониторы - NC191 (4.6 mb)