Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
• Never leave the chimney unsupervised when in operation. • Always place the chimney on an even base. Otherwise, the chimney could tip over and lead to a fire. • Never place the chimney close to heat sources, and protect the power cord from damages. Therefore, do not keep the power cord lying in front of the chimney. • Do not use the chimney with a time switch or a similar appliance. In case of auto-start, there exists a fire hazard if the chimney is covered or has been set up incorrectly. Risk of injury or burning • Never insert objects or body parts such as fingers inside the chimney through the iron rods. • Never allow children to use the chimney without the supervision of an adult. Explain to children the dangers of the appliance. • The chimney heats up when in operation. Therefore, never carry it when hot and do so only by the handle provided for this purpose • Lay the power cord such that no one treads or trips over it. Intended Use The chimney is used for decorating ad heating living rooms. This chimney is exclusively meant for household use and may be used only for this purpose. Observance of all the information in these operating instructions, especially the safety instructions is also from this point of view. This chimney is not intended for commercial or industrial use. Description of the appliance . Function switch . Thermostat . Flame regulator . Screws of the glass top . Glowing embers Technical Data Rated voltage: ..........................................230 V / ~50 Hz Power rating: ..........................................Max. 1850 Watt Light bulb : ..................2 candle bulbs, E-14, max. 25 W Before the First Use Before starting up the appliance, make certain that ... . the appliance or the accessories are in perfect condition, . all the packing material has been removed. Operation The chimney is operated by means of three switches: Function switch: You can set the basic functions with the Function switch. . Turn the Function switch . step by step for the following settings: Position Setting 0 OFF only flames Ventilator without heating low heat emission (900 W) maximum heat emission (1850 W) Thermostat: If you have selected a setting with heat emission through the Function switch . you can control the room temperature with the thermostat .. . Turn the Thermostat . to the "max“ position. As soon as the desire room temperature is reached... . Turn the Thermostat . back till you hear an audible click. The in-built thermostat now ensures a constant room temperature. Flame regulator With the Flame regulator . you can regulate the flame to any size. . Turn the Flame regulator . in the clock-wise direction until the desired flame size is obtained. Replacing the bulbs Danger of life-threatening electric shock: • Before you replace the bulbs, pull out the plug from the power socket, • and let it cool down completely. • Only use candle bulbs with an E-14 thread and max. 25 Watt . Loosen both the screws . with a slotted screwdriver...
Эта инструкция также подходит к моделям:Камины - KH 1117 (68.8 kb)
Камины - KH 1117 (68.8 kb)
Камины - KH 1117 (68.8 kb)
Камины - KH 1117 (68.8 kb)