Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Do not insert metal objects such as utensils, wire or drill bits, or things that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. • This may cause malfunction, an electric shock or a fire. • Always contact the Service Center if foreign substances/objects enter into the monitor. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. • Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time. Be careful when adjusting the stand angle. • Applying too much force may cause the monitor topple over or fall, resulting in injury. • Your hand or finger(s) may get caught between the monitor and the stand, causing injury. Adjust the resolution and frequency to the levels appropriate for the model. • Inappropriate levels of resolution and frequency may damage your eyesight. 15 inch - 1024 x 768 17,19 inch - 1280 x 1024 Be careful that adapter should not be in contact with water and therefore not be wet. • This may cause malfunction, an electric shock or a fire. • Do not use adaptor by the waterside or outside particularly when it rains or snows. • Be careful that adaptor should not be wet while cleaning floor with water. Keep all power adaptors apart. • Possible fire hazard. Keep power adaptor away from any other heat source. • Possible fire hazard. Remove and discard vinyl bag from power adaptor before use. • Possible fire hazard. Always keep power adaptor in well-ventilated area. Keep the volume at a proper level when you use the headphones. • Excessively loud volume levels may damage hearing. Keep a proper distance between your eyes and the monitor screen. • Sitting too close to the monitor on a continuous basis may damage eyesight. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not use the monitor where it can be exposed to strongvibrations. • Exposure to strong vibrations can be a fire hazard and shorten the life of the monitor. When moving the monitor, turn the power switch off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor. • Failure to disconnect a cable may damage it and lead to a fire or an electric shock. SyncMaster 153V/173V/152V/172V/193V/192V Monitor and Stand Power Cord Unpacking Front Signal Cable Rear Quick Setup Guide Please make sure the following items are included with your monitor. If any items are missing, Warranty Card contact your dealer. (Not available in all locations) User's Guide and Monitor Driver, Natural Color software SyncMaster 153S/173S Unpacking Front Rear Power Cord Monitor and Pivot Stand DC-Adapter Signal Cable Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Monitor Driver, Natural Color software Pivot S/W CD(Option) SyncMaster 153B/173B Unpacking Front Rear Power Cord Monitor and Stand DC-Adapter Signal Cable Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Audio Cable Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Monitor Driver, Natural Color software Pivot S/W CD(Option) SyncMaster 153V/173V/152V/172V/193V/192V Unpacking Front Rear 1. Auto button / Exit button 2. Menu button These buttons allow you to highlight and adjust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. a. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Use this button to auto adjustment direct access. / Use this button to Exit the active menu or the OSD. SyncMaster 153S/173S Unpacking Front Rear 1. Auto button / Exit button 2. Menu button These buttons allow you to highlight and adjust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. a. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Use this button to auto adjustment direct access. / Use this button to Exit the active menu or the OSD. S...
Эта инструкция также подходит к моделям:Мониторы - 152V (6.64 mb)
Мониторы - 153S (6.64 mb)
Мониторы - 153V (6.64 mb)
Мониторы - 172V (6.64 mb)