Оценок - 2, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Use this button to auto adjustment direct access. / Use this button to Exit the active menu or the OSD. SyncMaster 153B/173B Unpacking Front Rear 1. Auto button / Exit button Use this button to auto adjustment direct access. / Use this button to Exit the active menu or the OSD. 2. Menu button These buttons allow you to highlight and adjust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. When OSD is not on the screen, push the - or + button to adjust volume. a. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. b. PC sound connection Connect the audio cable for your monitor to the audio port on the back of terminal your computer. c. Headphoneconnection terminal Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. SyncMaster 153V/173V/152V/172V/193V/192V Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. Note: See Connecting Your Monitor for further information regarding cable connections. SyncMaster 153S/173S Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the DC Adapter for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Pin Press the button on the bottom rear of the stand in order to lock down the stand. Note : Always have your monitor faced front side down on a level surface (not resting on the stand) before locking it down. Pressing the button while the monitor stand is resting on a flat surface may cause your monitor to topple or fall and cause personal injury and/or damage to the unit. Note: See Connecting Your Monitor for further information regarding cable connections. SyncMaster 153B/173B Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Pin Press the button on the bottom rear of the stand in order to lock down the stand. Note : Always have your monitor faced front side down on a level surface (not resting on the stand) before locking it down. Pressing the button while the monitor stand is resting on a flat surface may cause your monitor to topple or fall and cause personal injury and/or damage to the unit. Note: See Connecting Your Monitor for further information regarding cable connections. SyncMaster 153V/173V/152V/172V/193V/192V English > Main > Setup > Connecting Your Monitor Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the monitor to the Macintosh computer using the D-SUB connection cable. 4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor. 5. Turn on your computer and monitor. If your monitor displays an image, installation is complete. SyncMaster 153S/173S English > Main > Setup > Connecting Your Monitor Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1. Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the monitor to the Macintosh computer using the D-SUB connection cable. 4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor. 5. Turn on your computer and monitor. If your monitor displays an image, installation is complete. SyncMaster 153B/173B English > Main > Setup > Connecting Your Monitor Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2...
Эта инструкция также подходит к моделям:Мониторы - 152V (9.81 mb)
Мониторы - 153S (9.81 mb)
Мониторы - 153V (9.81 mb)
Мониторы - 172V (9.81 mb)