Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Introduction Thank you for selecting the DPF508 Digital Photo Frame. The main features include a 5" Screen (4:3 Aspect Ratio) Liquid Crystal Display (LCD) monitor. The unit applies the latest state of the art electronics and is designed for use with SD/MMC/MS memory cards and USB memory devices. The unit is constructed to provide years of reliable, trouble-free service. Please read the entire instruction manual supplied with this product prior to operation. The documentation will assist you in obtaining the best equipment performance. All manuals should be stored for later use. B. Cautions and Warnings 1. Placement To prevent fire or electric shock, do not expose the DPF to rain or moisture. To prevent it from falling do not place the DPF on an unstable cart, stand, tripod, bracket or table. Keep the unit away from strong magnets, heat sources, direct sunlight, and excessive dust. 2. Installation Ensure that the DPF is used in accordance with the instructions and illustrations provided in this manual. 3. Objects and Liquid Do not push objects of any kind into the unit through openings; do not spill or spray liquid of any kind on or in the DPF (this may result in a fire or electric shock). Do not place anything heavy on the DPF. To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other material. 4. Disassembly Do not attempt to disassemble the DPF. There is a risk of electric shock. Contact qualified service personnel if your system is in need of repair. 5. Cleaning Unit When cleaning, make sure the DPF is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the DPF only. 2 C. Contents 1. 1 x 5” Digital Picture Frame w/Battery (CR2025) 2. 1 x AC to DC Adaptor 3. 2 x Interchangeable Frames (Black/White) 4. 1 x Instruction Manual D. Positioning Your Frame Pull out the stand to place the frame. Rotate the stand to position the frame vertically or horizontally. Adjust the stand’s length to obtain the desired vertical or horizontal viewing angle. 3 SD/MMC/MS Slot Insert the SD/MMC/MS card USB Slot Insert a USB memory device Power On/Off Switch DC 9V Plug the AC adaptor Back Side CR2025 backup Eyeholes for battery wall mounting Top Side 1) Brightness: Press to adjust the Brightness. 2) Play/Pause/Mode: Press to PLAY/PAUSE or select an option. 3) Menu :Press to access the main menu or Card Selection menu. 4) Up/Copy/Delete: Press to navigate, copy or delete a photo. 5) Down/Rotate: Press to navigate or rotate a photo. 6) Prev. : Press to navigate or view the previous photo. 7) Next: Press to navigate or view the next photo. 5 G. Viewing Photos 1. Attach the AC / DC adapter to the DC power jack and plug the adapter into an AC outlet. 2. Place the unit’s Power switch to the ON position and wait for the to display the Main Menu. 3. Insert the desired Media into the unit’s SD/MMC/MS USB slots provided. 4. Using the LEFT / RIGHT arrow keys position the highlight over the PHOTO icon and press the MENU button. 5. Select the desired media by using the unit’s LEFT / RIGHT arrow keys to position the highlight. Once the desired media is highlighted press the PAUSE / PLAY / MODE button to confirm your selection. Note: Only the media installed in the unit will be allowed to be selected. 6. With the Main Menu displayed use the unit’s LEFT / RIGHT arrow keys to position the highlight over the PHOTO icon and press the PAUSE / PLAY / MODE key. The unit will enter SLIDE SHOW mode and will sequentially display the photos saved on the selected media. 6 7. Pressing the PAUSE / PLAY / MODE key while the unit is in the SLIDE SHOW mode will results in the unit entering the PAUSE mode. Once the unit is in the PAUSE mode the operator can use the LEFT / RIGHT arrow keys to display the PREVIOUS / NEXT photo. 8. Selecting PAUSE / PLAY / MODE again will place the DPF in the Thumbnail mode. In this mode the unit displays rows of thumbnail pictures. Once in this mode the operator can use the UP / DOWN / LEFT ARROW / RIGHT ARROW keys to navi gate through the pictures. When the desired picture is highlighted pressing the PLAY / PAUSE / MODE key again will result in the DPF starting the SLIDE SHOW from the highlighted picture. H. Copying and Deleting Photos Copying Photos to Internal Memory Please refer to step “G” first. If you want to copy the photo, place the DPF in PAUSE mode when the desired picture is displayed. Then press the UP/COPY/DELETE button. A pop-up screen appears indicating “Copy? Yes/No” use the Left or Right button to highlight the Yes icon, then press PLAY/PAUSE/MODE button to confirm. “Wait!Capture Photo” appears as the photo is copied into the internal memory. The DPF can store up to approximately 40 photos. Note: You can rotate photos clockwise by pressing the ROTATE button on the remote control or the Down button on the frame in the Pause mode. Rotated photos are copied in ...