Rt & Lt) 8212341 Rod, Blending 8212340 Whisk FOR ORDERING INFORMATION REFER TO PARTS PRICE LIST 2 8212055

Use a straight edge to verify the alignment of the sprockets. Inspect sprockets and chains. Replace if excessively worn. PROBLEM: FEED IS SEPARATING AS IT DISCHARGES FROM THE MIXER DOOR CAUSE SOLUTION DOOR IS OPEN LESS THAN HALF WAY Hay mixed in the load will separate from the grain if the discharge door is not open at least half way. Additional flow control plates may be required. 3000STOPR005810R082503 TROUBLE SHOOTING PROBLEM: OIL LEAKING AROUND THE EDGES OF THE OIL BATH CAUSE SOLUTION INSPEC

This new type of seal allows easy cleaning. Solid stainless steel breaker bar (adjustable four positions) Heavy duty stainless steel main shaft Single end belt drive with integral gearhead motor mounted on adjustable base eliminates binder Main motor can be replaced from the back or the drive side (depending on option) Standard agitator RPM: 35/70 (other RPM's are available as options) Manual central lubrication system Top Assembly • 12" (305 mm) O.D. butterfly or sliding flour gate • Tw

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGERWARNING You can be killed or seriously injured if you don’t immediately follow instructions. You can be killed or seriously injured if

ORDERING INFORMATION REFER TO PARTS PRICE LIST 2 8212055

Rt & Lt) 8212341 Rod, Blending 8212340 Whisk FOR ORDERING INFORMATION REFER TO PARTS PRICE LIST 2 8212055

7. Remove the attachment. Remove the attachment from the power unit, in some cases it will be necessary to move the arm to allow removal of the attachment. Refer to the instructions for the specific attachment being used. 8. Continue use. If the attachment was of the batch feed type and you wish to continue using the attachment, empty the bowl or jar of the attachment per its specific instructions and reinstall the attachment as before. Repeat the steps 5 through 7 as often as necessary to compl