Rinse and dry. • Place the Bottom of the Stand (B) on a flat surface. • While holding the Mixer Shelf (A) push it down onto the Bottom of the Stand (B) so that the protruding pegs of the Mixer Shelf (A) slide down the side and eventually lock into the holes on the Bottom of the Stand (B). • Place the mixer on the Mixer Shelf by sliding the mixer forward into position so that the front of the mixer locks in place. • The mixer is placed in the upright position on the stand by pushing open the

ace. • While holding the Mixer Shelf (A) push it down onto the Bottom of the Stand (B) so that the protruding pegs of the Mixer Shelf (A) slide down the side and eventually lock into the holes on the Bottom of the Stand (B). • Place the mixer on the Mixer Shelf by sliding the mixer forward into position so that the front of the mixer locks in place. • The mixer is placed in the upright position on the stand by pushing open the Locking flap (C) on the rear of stand and pulling the Mixer Shelf

If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. SAVE THESE INSTRUCTIONS THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY Rev. 05/02A Main Components 1. Main Housing 2. Beater Release Button 3. Speed Selector 4. Range Selector, Hi-Lo 5. Beater Openings 6. Mixer Beaters (2) 7. Dough Hooks (2) 8. Cord Rewind Button 9. Whisk (1) CAUTION: Pull power cord out slowly do not force. Do not pull power cord out beyond the Yellow tape mark on the cord or you will damage

NEVER let the power cord hang over the edge of a table or counter, touch hot surface or become knotted. NEVER leave this appliance unattended while in use.NEVER allow children to use this appliance unsupervised. NEVER use harsh, abrasive or caustic cleansers to clean this appliance. ALWAYS avoid contact with moving parts while unit is in operation. Keep hands, hair, clothing as well as other utensils away from beaters/dough hooks during operation. NEVER mix dry, thick or heavy mixture for more t

, 250Wats EURO- PRO Operating LLC U. S.: 94 Main Mill Street, Door 16Canada: 4400 Bois- Franc Plattsburgh, NY 12901St-Laurent, QC H4S 1A7 Tel. : 1 (800) 798-7398 HAND MIXER SAVE THESE FOR HOUSEHOLD Rev. 01/05 1 This appliance has a polarized plug (one blade is wider than theother). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact electrician.

Beaters:Use for liquid mixes such as creams, egg- whites, confectionery doughs, etc. Insert stem end of beaters (one at a time) into the openings in the mixer. Insert the beater with the locator ring in the larger of the two holes. The ring on the beater must sit below the surface of the mixer housing. To ease the inserting of the beaters, a slight twisting motion will aid in engaging the beater drive tabs. Install the second beater in the same manner as above. Whisk: The whisk is used to beat a

Note: An extension cord may be used if you are careful in its use: 1. The electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. 2. An extension cord with the power cord must be arranged so that it will not drape over the countertop or tabletop where they can be pulled on by children or tripped over accidentally. GETTING TO KNOW YOUR HAND MIXER Technical Specifications Voltage: 120V., 60Hz. Power: 250 Watts 2 1. Main Unit 2. Accessory Eject

By returning this card you acknowledge to have read and understood theinstructions for use, and warnings set forth in the accompanying instructions. RETURN TO EURO-PRO OPERATING LLC, 94 Main Mill Street, Door 16, Plattsburgh, N. Y. 12901_ ____________ ________________________ _________________________ ________ Appliance model_ ____________ ________________________ _________________________ ________ Date purchased Name of store_ ____________ ________________________ _________________________ ____

Do not modify the plug in any way. SAVE THESE FOR HOUSEHOLD 1 Main Components 1. Hand mixer 2. Hand blender arm connection 3. Hand blender arm connection cover 4. Beaters/ dough hooks connections 6. Speed selector 7. TURBO button 8. Hand blender button 9. Dough hooks 10. Beaters 11. Hand blender 11a. Guide for maximum immersion of hand blender 12. Beaker and cover 13. Anti- skid base/lid 14. Chopper blade 15. Chopper bowl 16. Stand/mount 17. Chopper bowl cover with gear 18. Whisk (optional) 2 Co

PARTS LISTS AND POWER OPTIONS Drum and Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 Mixing Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 Engine Housing Assembly . . . . . . . . . . . . . . . . . . . . . . . . .18-19 Frame Drive and Clutch Control . . . . . . . . . . . . . . . . . . . . 20-21 Engine and Power Options . . . . . . . . . . . . . . . . . . . . . . . . .22-25 2 1 – SAFETY PRECAUTIONS THE FOLLOWING PRECAUTIONS ARE SUGG