18. Always confirm that the proper lengths and types of extension cords are being utilized, when if needed, before starting the tool. 19. Always confirm that the motor air vents are fully open, before using the tool. 20. Always wait until the motor has reached full speed, before starting a cut. 21. Always keep the handles dry, clean and free of oil and grease. Hold the tool firmly, when in use. 22. Always fix the motor section using the chain when carrying about the tool. 23. Always keep the cut

Fig. 14 WARNING: Always remove the lock-off button from the handle when the power tool is not in use. This will ensure that the power tool cannot be turned on accidentally or by someone (especially a child) who is not qualified to use the power tool. If the lock-off button is left in the handle, serious personal injury can result. Since the lock-off button fits rather tightly, it may be necessary to turn it to the left and right during mounting and removing. 2. Cutting Operation (1) As shown in

There is no need to fasten the holder sleeve at this time. (Fig. 6) (5) Pull the back of the saw blade two or three times by hand and check that the blade is securely mounted. When pulling the blade, you will know it is properly mounted if it clicks and the holder sleeve moves slightly. (Fig. 7) CAUTION: When pulling the saw blade, be absolutely sure to pull it from the back. Pulling other parts of the blade will result in an injury. 7. Dismounting the blade (1) Turn on and off the switching tri