Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
i In the default setting, a setting is activated that automatically switches the Pocket PC into the Suspend mode after three minutes when working without a power connection if no entries are made during this time. You can switch on the Pocket PC again at any time by briefly pressing the Suspend/Resume button and then continue working where you left off. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Synchronising data with ActiveSync To also have the current version of the data you have processed on the road on your Pocket PC available on your PC/notebook, you must copy these data to your PC/notebook. This procedure is conveniently enabled with data synchronisation: In the ActiveSync program you can specify that the respective latest version of a file be detected and then automatically updated on the respective data carrier - regardless of whether it is the Pocket PC or a PC/notebook. You can synchronise your data between your Pocket PC and your PC/notebook via the cradle, using the ActiveSync cable or via infrared, Bluetooth or wireless LAN. You will find information on how you synchronise data using ActiveSync, in the ActiveSync help file on your PC/notebook. If you have not yet installed the ActiveSync program on your PC/notebook, you must install it on your PC/notebook before the first data synchronisation between your Pocket PC and your PC/notebook (see section "Initial start-up"). A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Connecting Pocket PC to PC/notebook 2 4 13 > Switch your PC or notebook on. > Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC. > Connect the ActiveSync cable to a USB port (2) of your PC/notebook. The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your Pocket PC and your PC/notebook will be established. Synchronising data with new PC/notebook If you want to synchronise data with a new PC/notebook, you must first install ActiveSync on this new PC/notebook and establish a new ActiveSync partnership (see the corresponding explanations in the "Initial start-up" section). A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Using cradle With the cradle (optional) you can charge the battery in the Pocket PC and/or carry out a data synchronisation between the Pocket PC and a PC/notebook. The cradle has an audio output for connecting active loudspeakers or headphones. Selecting location for cradle Place the cradle on a stable, flat and nonslippery surface. In view of the multitude of different finishes used on furniture, it is possible that the rubber feet of the Pocket PC will mark the surface they stand on. The cradle and the PSC11R-050 power adapter should be at least 200 mm apart. Keep other objects 100 mm away from the cradle and its PSC11R-050 power adapter to ensure adequate ventilation. The Pocket PC and the cradle should not be subjected to extreme environmental conditions. Protect the Pocket PC and cradle from dust, moisture and heat. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Using cradle for data synchronisation Before the first data synchronisation between the Pocket PC and the PC/notebook, you must install the program ActiveSync on your PC/notebook (see section "Initial start-up"). 4 3 5 4 2 > Switch your PC or notebook on. > Place the Pocket PC in the cradle (1). > Connect the ActiveSync cable (2) to the ActiveSync port of the cradle. > Connect the ActiveSync cable to a USB port (3) of your PC/notebook. The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your Pocket PC and your PC/notebook will be established. > If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 power adapter (see section "Connecting PSC11R-050 power adapter"). You can leave the connections between the cradle and PSC11R-050 power adapter, and between the cradle and your PC/notebook connected all the time. This means you only need to place your Pocket PC in the cradle to charge the battery and for data synchronisation. More information on data synchronisation is contained in the section "Synchronising data with ActiveSync" and in the help file on your Pocket PC. i A26391-K165-Z120-1-7619, edition 1 Configuring the Pocket PC You can already choose from a large number of programs when you use the Pocket PC for the first time. In addition, proven default settings are defined for the menu structure, energy management, memory management and security functions. But, of course, you can add and remove programs and configure the Pocket PC as desired. You will find out how to use some of the functions (e.g. energy management) in this section. For information on removing and adding programs, please refer to the documentation from the software manufacturer and the ActiveSync help file, that you can call at any time after installing ActiveSync on your notebook/PC. Optimising energy management General information on energy management The batter...
Эта инструкция также подходит к моделям:Кпк - LOOX N (627.9 kb)