Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
SYMPTOMSYMPTOM CHECKCHECK Heating/Cooling operation is not working efficiently. >• Set the temperature correctly. • Close all doors and windows. • Clean or replace the filters. • Clear any obstruction at the air inlet and air outlet vents. Noisy during operation. >• Check if the unit has been installed at an incline. • Close the front panel properly. Remote control does not work. (Display is dim or transmission signal is weak.) >• Insert the batteries correctly. • Replace weak batteries. The unit does not work. >• Check if the circuit breaker is tripped. • Check if timers have been set. The unit does not receive the signal from the remotecontrol. >• Make sure the receiver not obstructed. • Certain fluorescent lights may interfere with signaltransmitter. Please consult authorized dealer. TROUBLESHOOTING INFORMATION 10 FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE • Checking of remote control batteries. • No obstruction at air inlet and air outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: . 8°C Heating: . 14°C FOR EXTENDED NON-USE • Activate Heat mode for 2~3 hours as an alternative to remove moisture left in the internal parts thoroughly toprevent mould growth. • Turn off the power supply and unplug. • Remove the remote control batteries. NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY AND UNPLUG then please consult authorized dealer under the followingconditions: • Abnormal noise during operation. • Water/foreign particles have entered the remote control. • Water leaks from Indoor unit. • Circuit breaker switches off frequently. • Power cord becomes unnaturally warm. • Switches or buttons are not functioning properly. Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countriesoutside the European Union] These symbols are only valid in the EuropeanUnion. If you wish to discard these items, please contact your local authorities or dealerand ask for the correct method of disposal. Note for the battery symbol (bottom twosymbol examples): This symbol might be used in combination witha chemical symbol. In this case it complies withthe requirement set by the Directive for thechemical involved. Pb ENGLISH 11 MEMO ENGLISH 11 MEMO Declaration of ConformityDeclaration of Conformitywith the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment(adopted by Order №1057 of Cabinet of Ministers of Ukraine) The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS). The content of hazardous substance with the exemption of the applications listed in the Annex №2 of TR on RoHS: 1. Lead (Pb) – not over 0,1wt % or 1000wt ppm; 2. Cadmium (Cd) – not over 0,01wt % or 100wt ppm; 3. Mercury (Hg) – not over 0,1wt % or 1000wt ppm; 4. Hexavalent chromium (Cr6+) – not over 0,1wt % or 1000wt ppm; 5. Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm; 6. Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm. Declaration of ConformityDeclaration of Conformitywith the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment(adopted by Order №1057 of Cabinet of Ministers of Ukraine) The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS). The content of hazardous substance with the exemption of the applications listed in the Annex №2 of TR on RoHS: 1. Lead (Pb) – not over 0,1wt % or 1000wt ppm; 2. Cadmium (Cd) – not over 0,01wt % or 100wt ppm; 3. Mercury (Hg) – not over 0,1wt % or 1000wt ppm; 4. Hexavalent chromium (Cr6+) – not over 0,1wt % or 1000wt ppm; 5. Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm; 6. Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm. Инструкции по эксплуатации Кондиционер © Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2010. Неразрешенноекопированиеираспространениеявляютсянарушениемзакона. Модель№. ВнутреннийблокВнешнийблок CS-PW18MKD CU-PW18MKD CS-PW24MKD CU-PW24MKD Названиеиадресзавода-изготовителяуказанынаупаковкеинаизделии. ME67 14 МЕРЫ ПРЕДОСТОРОЖНОСТИ Во избежание получения травм, нанесения телесных повреждений другим лицам и ущерба имуществу следует соблюдать следующие инструкции. Неправильная эксплуатация вследствие несоблюдения инструкций нанесет вред или ущерб, степень серьезности которых классифицируется следующим образом: ПРЕДУПРЕЖДЕНИЕ Этот символ предупреждает о смертельной опасности или о риске получения серьезной травмы. ПРЕДОСТЕРЕЖЕНИЕ Этот символ предупреждает об опасности травмы или нанесения вреда имуществу. Инструкции, которые следует вы...
Эта инструкция также подходит к моделям:Кондиционеры - CU-PW24MKD (3.02 mb)
Кондиционеры - CS-PW24MKD (3.02 mb)
Кондиционеры - CS-PW18MKD (3.02 mb)