Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
2. Keep the Generator and surrounding area clean at all times. 3. When spills of fuel, oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a covered metal container. 4. Never store fuel or other flammable materials near the Generator. 5. Do not smoke, or allow sparks, flames or other sources of ignition around the Engine and Fuel Tank. Fuel vapors are explosive. 6. Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and connections to avoid sparking or arcing. These events could ignite fumes or vapors. 7. Do not refill the Fuel Tank while the Engine is running or while the Engine is still hot. Do not operate the Generator with known leaks in the fuel system. 8. Excessive buildup of unburned fuel gases in the exhaust system can create a potentially explosive condition. This buildup can occur after repeated failed start attempts, valve testing, or hot engine shutdown. If this occurs, open exhaust system drain plugs, if equipped, and allow the gases to dissipate before attempting to restart the Generator. 9. Use only engine manufacturer recommended fuel and oil. Mechanical Precautions: 1. ALWAYS turn off the Engine. Allow the Engine to completely cool, disconnect the negative battery cable from the battery, and remove the key from the Ignition Switch (45) before carrying out maintenance. SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 8 2. Check for damaged parts. Before using the Generator, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. 3. The Generator is designed with guards for protection from moving parts. In any case, care must still be taken to protect personnel and equipment from other mechanical hazards when working around the generator. 4. Do not operate the Generator with safety guards removed. While the Generator is running, do not attempt to reach around the safety guards for maintenance or any other reason. 5. Keep hands, arms, long hair, loose clothing, and jewelry away from moving parts. Be aware that when Engine parts are moving fast they cannot be seen clearly. 6. Keep access doors on enclosures closed and locked when access is not required. 7. When working on or around the Generator always wear protective clothing including ANSI approved safety gloves, safety eye goggles, and safety hat. 8. Do not alter or adjust any part of the Generator that is assembled and supplied by the manufacturer. 9. Always follow and complete scheduled Engine and Generator maintenance. Chemical Precautions: 1. Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces. 2. Avoid body contact with fuels, oils, and lubricants used in the Generator. If swallowed, seek medical treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. For eye contact, immediately flush eyes with clean water. Noise Precautions: 1. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always wear ANSI approved ear protection when operating or working around the Generator when it is running. SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 9 Electrical Precautions: Electrical Precautions: . All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable. 2. The Generator must be properly earth-grounded by a licensed electrician in accordance with all relevant electrical codes and standards before operation. 3. If an extension cord (not included) is used, make sure to use only UL® approved cords having the correct gauge and length. (See Figure A.) FIGURE A REQUIRED MINIMUM EXTENSION CORD GAUGE – 120/ 240 VOLT NAMEPLATE AMPERES (At Full Load) EXTENSION CORD LENGTH 0 - 25 Feet 25 - 50 Feet 50 -100 Feet 100 – 150 Feet 150– 200 Feet 0 - 5 16 16 16 12 12 5.1 - 8 16 16 14 10 - 8.1 - 12 14 14 12 -- 12.1 - 15 12 12 10 -- 15.1 - 20 10 10 10 -- 4. Do not attempt to connect or disconnect load connections while standing in water, or on wet or soggy ground. 5. Do not touch electrically energized parts of the Generator and interconnecting cables or conductors with any part of the body, or with any non-insulated conductive object. 6. Connect the generator only to a load or electrical system (120 volt and 240 volt) that is compatible with the electrical characteristics and rated capacities of the Generator. 7. Before servicing equipment powered by the Generator, disconne...