Оценок - 3, средний балл: 3.3 ( )

Производитель: Admiral Размер: 5.71 mb Название файла: Язык инструкции:

Recommended for nighttime use. MED COOL provides cooling, automatically with middle air circulation. Recommended for nighttime use. HIGH COOL provides cooling, automatically with quick cooling or for extremely hot days. Once room is cooled, reduce setting to LOW COOL. NOTE: After setting the mode, allow 3 minutes before switching to another mode. OFF will completely shut-off the unit. THERMOSTAT The thermostat automatically controls the cooling cycle (compressor) of the air conditioner to maintain room temperature. However, the fan motor will continue to operate after the compressor (cooling cycle) is completed. Fresh Air Ventilation is usually kept in the closed position. Use only when clearing smoke and/or odors from the room. Pull to open. Operating Instructions Fig. 15 Mechanical control model Fig. 16 Fresh Air Vent Lever F HR FAN SPEED MODEOFF ON/ TIMER Airconditioner WAIT THREE MINUTES BEFORE RESTARTING Thermostat knob Mode knob LOW FAN MED FAN HIGH FAN OFF HIGH COOL MED COOL LOW COOL 1 3 5 7 9 CO LE R O 1 3 12 Mode button Each time MODE button is pressed, the operation mode is changed in sequence: COOL: COOLING FAN ONLY ENERGY SAVING COOLING Operating Instructions Control Panel You can easily operate this air conditioner by pressing relevant button on the control panel as well as the remote control. F Indication symbols of LED on control panel: High fan speed Medium fan speed Low fan speed Auto fan speed Cooling Fan only Display set temp Display set timer Timer Above LED lights on when the relevant mode is in used. Energy-saving NOTE: Temperature setting range is from19 (66 ) to 31 (88 ). Fan Speed button Used to select fan speed in sequence auto, low, medium and high. Timer button Used to set or cancel timer operation. When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER. Timer setting range is 0 to 24 hours. If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be canceled. If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you wantto cancel ON TIMER, press TIMER button. Used to set room temperature in COOLING mode or used to set time in TIMER mode. If the two keys are pressed at the same time, the temperature LED display will alternate between and . Button Electronic control panel model Heating HEAT: COOLING FAN ONLY HEATING ENERGY SAVING COOLING h Fan Speed Mode Timer Airconditioner Button The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. When the air conditioner is heating, allow 3 minutes after you press this button. NOTE: After setting the mode, allow 3 minutes before switching to another mode. In the FAN ONLY Mode, Room Temperature display range is from 0 (32 ) to 38 (99 ). Room Temperature below 32 ,the Temperatur...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: