|
Фрагмент инструкции
Specification Revised 5/07 230142 You must use the rear filler strip kit shipped with the range or the optional accessory backguard when installing these ranges Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating. Optional Kits for Slide-In Gas Ranges: (Available at additional cost) Lower/Side Trim Kits JXS56WW - Lower Trim Kit (White) JXS56BB - Lower Trim Kit (Black) Accessory Backguards JXS32BB - Black Accessory Backguard JXS37BB - Black Glass Accessory Backguard JXS32WW - White Accessory Backguard JXS37WW - White Glass Accessory Backguard Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Dimensions and Installation Information (in inches) PGS975BEM/WEM GE Profile™ 30" Slide-In Gas Range 28-1/4* 36 Maintain at least 6" from nearest combustible surface. Acceptable Electrical Outlet Area 30" Slide-In Range Dimensions (in inches) 2-1/4 5 6 4-1/2 30 30" Min. 15" Min. 6 30" Slide-in Elec. Range Aug. 8, 2003 -km 23-3/16 30 30 If you are NOT using the Filler strip or Backguard: If you are using the Filler strip or Backguard: 25 *Wall to front of closed door handle 31-1/2 28-1/4* 36 Maintain at least 6" from nearest combustible surface. Acceptable Electrical Outlet Area 30" Slide-In Range Dimensions (in inches) 45-1/8 2-1/4 5 6 4-1/2 30 30" Min. 15" Min. 6 30" Slide-in Elec. Range Aug. 8, 2003 -km 23-3/16 30 30 If you are NOT using the Filler strip or Backguard: If you are using the Filler strip or Backguard: 25 *Wall to front of closed door handle on model JSP34. 28" on models JSP26/JSS26/16. Note: Range may be placed with 0" clearance (flush) at the back wall and side walls below countertop if the range side trims above the countertop extend beyond the cabinet fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest combustible surface. 30 31-1/2 Acceptable Gas Line & Electrical Outlet Area Max. depth of cord, plug, receptacle box & gas hookup 3-1/2" to prevent interference with drawer 30" Min. Shave Raised Edge To Clear 31-1/8 Wide Control Panel 30" Min. to unprotected cabinet from 23-3/16 countertop 18" Min. 13" Max. 3 29-15/16" Min. 30-1/16" Max. 25 9/16 7 15 12 *A – JXS37 is 5-1/4" and JXS32 is 4" 27-1/2** 44-3/4 (excluding handle) **Total depth from wall to front of closed oven door including handle is 30-1/2. B is 9-1/2" from walls on either side for P2S975, PGS975 and PGS908 and 6” for PGS968 B 35-7/8"–38" from floor to countertop Counter Cutout Dimensions (in inches) 2-7/8" To Front Surface Of Countertop 20-5/8" Door Clearance From Front Surface of Countertop 31-1/4 30 A* Accessory Backguard 36 2" (Grates) 24 Acceptable Gas Line & Electrical Outlet Area Max. depth of cord, plug, receptacle box & gas hookup 3-1/2" to preven...
Эта инструкция также подходит к моделям:Компьютерные аксессуары - PGS975WEM (311.06 kb)