Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 545.58 kb Название файла: Язык инструкции:

If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Charging 1 2 Insert the small plug into the charger (Fig. 3). Put the appliance in the charger (Fig. 4). Charge the appliance for 8 hours to be able , to shave and trim for up to 50 minutes. The charging light on the adapter goes on to , indicate that the appliance is charging (Fig. 5). Using the appliance Take your time when you first start to shave , sensitive areas.You have to acquire practice with the appliance.Your skin also needs some time to adjust to the procedure. You can use the appliance wet or dr y to shave hair on all par ts of the body below the neckline. So do not use this appliance to shave facial hair or scalp hair! Shaving 1 2 3 If one of the trimming combs is still attached, remove it by gently pushing the outer comb tooth sideways (Fig. 6). Press the on/off button once to switch on the appliance. Place the shaving head on the skin. Do not apply too much pressure and stretch the skin thoroughly when you move the shaver across it. 4 Move the appliance against the direction of hair growth while you press it lightly (Fig. 7). Make sure that the shaving head is always fully in contact with the skin. Trimming The trimming combs allow you to cut hair to 3 different lengths. Star t with the large trimming comb to acquire practice with this appliance. Trimming comb Hair length after cutting Small 3mm 5mm Medium Large 7mm 1 2 3 Snap one of the three trimming combs onto the appliance with the tips pointing in either direction. (Fig. 8) Press the on/off button to switch on the appliance. To trim the hair, move the appliance against the direction of hair growth (Fig. 9). Always make sure that the tips of the comb point in the direction in which you move the appliance. Tips If the hairs are longer than 10mm, you can , trim them first to make shaving easier. Always make sure the appliance is in full , contact with the skin to get optimal results. Trimming is easier when the skin and hair are , dry. When you use the appliance in the shower or , bath, apply some shaving foam or shower gel to your skin. Cleaning and maintenance Clean the appliance after ever y use. 1 2 3 4 5 Switch off the appliance. Pull the shaving foil out of the appliance. (Fig. 10) Brush the hairs off the cutter block and the shaving foil. Make sure that you also brush away any hairs that have collected under the trimmers (Fig. 11). After cleaning, snap the shaving foil back into the appliance (‘click’) (Fig. 12). Rinse the appliance under the tap (Fig. 13). Lubricate the shaving foil with a drop of , sewing machine oil twice a year. Replacement In case of ver y frequent use, replace the shaving head (type number TT2000) ever y year. Replace a damaged shaving head immediately. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: