Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Capresso, модель Impressa S9

Производитель: Capresso
Размер: 479.73 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


15.8 PROGRAMMING ECONOMY MODE In the setting ECONOMY MODE ON the heating element for steam turns off 10 minutes after last use of steam. In the setting ECONOMY MODE OFF the heating element for steam turns off 20 minutes after last use of steam. Whenever the heating element is off the green indicator lights inside the steam buttons are off. COFFEE READY • Press the P button. POWDER QUANTITY / PRESS KEY • Press the + button until the display shows ECONOMY MODE OFF • Press the P button. • Press the + button to change to ECONOMY MODE ON • Press the P button to confirm. • Press the N button to return to COFFEE READY or press the + button to go to the next function. 15.9 PROGRAMMING TIMER/CLOCK If you want the machine to turn itself on automatically you need to set the time. COFFEE READY • Press the P button. 21. POWDER QUANTITY / PRESS KEY • Press the + button until the display shows TIME –.– • Press the P button. • Press the + or – button to set the hours. • Press the P button to confirm the hours. • Press the + or – button to set the minutes. • Press the P button to confirm the minutes. Attention: The time is displayed in the 24hr mode (not AM/PM). Therefore if the actual time is 3:45 p.m. you must set the time to 15:45. • Now press the + button to advance to the next function. 15.10 PROGRAMMING AUTO TURN-ON TIME After setting the actual time (see chapter 15.9) you can now set the auto turn-on time. UNIT ON —.—. • Press the P button. • Press the + or – button to set the hours. • Press the P button to confirm the hours. • Press the + or – button to set the minutes. • Press the P button to confirm the minutes. The machine will turn itself on at the programmed time. IMPORTANT: To switch off the automatic timer proceed as follows: • Press the P button. • Press the N button. UNIT ON :— 15.11 PROGRAMMING AUTO SHUT-OFF TIME The machine is programmed to shut off 5 hours after last use. You can select from 1.2 hour to 9 hour shut off or manual shut off. COFFEE READY • Press the P button. POWDER QUANTITY / PRESS KEY • Press the + button until the display shows OFF AFTER 5.0 HOURS • Press the P button. • Press the + or – button for desired setting. • Press the P button to confirm. • Press the N button to return to COFFEE READY or press the + button to go to the next function. 15.12 CUP COUNTER, ETC. The cup counter will show you the total number of coffee and water uses. It will show for example 22 SUPPLIED. If you push any of the coffee buttons or the rinse button it will show you how often this particular button has been used. (There is no display for number of hot water or steam uses). • Press the N button to return to COFFEE READY or press the + button to go to the next function. 15.13 PROGRAMMING LANGUAGE SELECTION The machine can display its messages in seven languages. COFFEE READY • Press the P button. POWDER QUANTITY / PRESS KEY • Press the + button until the display shows LANGUAGE ENGLISH • Press the P button. • Press the + or – button for desired language. • Press the P button to confirm. 15.14 RE-INSTALL FACTORY SETTINGS You can re-install the factory settings for the following functions: • coffee and water quantity, coffee temperature for all coffee buttons, steam portion and tea portion. Proceed as follows: COFFEE READY • Press and hold the N button until you hear a beep. Now the above functions are set according to chapter 6 (factory settings). 16. CARE AND MAINTENANCE 16.1 FILL WATER FILL WATER If this message shows on the display, no more coffee can be made until you fill the water container. The water container will never be completely empty. The low water floatation device (Fig.1;4) activates the FILL WATER indicator when there are about 10 oz. of water left. • Remove water tank, rinse and fill with fresh water and replace. 16.2 EMPTYING THE USED COFFEE CONTAINER EMPTY GROUNDS Used coffee grounds are collected in the used coffee container (Fig.1,16). If this message shows on the display no more coffee can be made until you empty the used coffee container. 22. • Remove the used water tray carefully since there is water in it (Fig.1, Fig.18, Fig.19) ATTENTION: Do not unplug the machine while you are emptying the coffee grounds. • Empty the used coffee container and the water tray (drawer). • Make sure the two metallic contacts of the drawer are clean and dry (Fig. 20). • Replace the used coffee container and drawer. COFFEE READY 16.3 EMPTYING THE USED WATER TRAY EMPTY TRAY If this message shows on the display no more coffee can be made until you empty the drawer. Follow the instructions in chapter 16.2. 16.4 FILL BEANS FILL BEANS • Fill beans as described in chapter 7a. The message FILL BEANS will only disappear after making the next cup of coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans (please make sure the machine is turned off when cleaning.) 16.5 STONES AND BEANS Every coffee specialty store will tell you that occasionally small stones can ...

Эта инструкция также подходит к моделям:
Кофеварки - Impressa S8 (479.73 kb)
Кофеварки - Impressa S7 (479.73 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории