Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Filter holder 4. Glass pot (with lid) 5. Hotplate (beneath glass pot) 6. Start/stop button (I/O) PRIOR TO FIRST USE • Read the safety instructions through carefully. • Ensure that the cord is fully extended. • Clean the glass pot using normal washing-up liquid or in a dish washer. • To rinse the coffee maker through, pass a potful of water through the machine before using it for the first time. USING THE COFFEE MAKER • Pour fresh cold water into the glass pot (4). • Lift the cover (1) of the water reservoir, and carefully pour the water from the glass pot into the reservoir (2). • Close the cover of the glass pot (4), and place it on the hotplate (5). • Place a filter (size 1 x 4) in the filter holder(3), and put coffee or tea in it. the on/off button so that the button is pressed down towards the letter "I". The indicator light will now come on and the coffee maker starts. • If you want to keep the coffee hot after it has been made, you can place it on the hotplate (5) and leave the coffee maker on. CLEANING • Before cleaning, remove the plug from the wall socket and allow the coffee maker to cool down. • The glass pot can be washed using normal washing-up liquid. • The best way to clean the coffee maker itself is to wipe it with a damp cloth using hot water and a little washing-up liquid. The coffee maker must not be submerged in any form of liquid. • Do not use any kind of strong or abrasive cleaning agent on the coffee maker or accessories. Never use a scouring sponge or similar to clean the coffee maker, as the surface may be damaged. DESCALING The lime content of ordinary tap water means limescale may be deposited inside the coffee maker. This limescale may be loosened using acetic acid (NOT ordinary vinegar) or descaler, available in supermarkets, etc. 1. Mix 100 ml acetic acid with 300 ml cold water, or follow the instructions on the descaler packaging. 2. Pour the solution into the water reservoir and switch the coffee maker on using the I/O button. 3. Allow half of the solution to run through the coffee maker, and then switch it off for approximately 10 minutes. 15 645085_IM 08/01/07 14:26 Side 16 4. When the 10 minutes are up, switch the coffee maker on again and allow the remainder of the solution to run through it. 5. To remove the final residues of limescale and acetic acid, pour a potful of cold water into the water reservoir, switch the coffee maker on and pass the water through it. 6. Pass fresh water through the machine 3 times (as described in point 5). 7. The coffee maker is now ready for use again. FOR UNITED KINGDOM ONLY Plug wiring: This product is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that are ASTA or BSI approved to BS1362 and with a rated current of 13 amps should be used. If there is a fuse cover fitted, this cover must be refitted after changing the fuse. If the fuse cover is lost or damaged, the plug must not be used. You must also check if the socket outlets in your home fit with the plug of the appliance. If the socket outlet in your home does not fit with the plug, the plug must be removed and disposed of safely as insertion of the plug into the socket is likely to cause electric hazard. A replacement plug should be wired according to following description. Important This appliance must be earthed. The wires in the cord set are coloured thus: BLUE- Neutral, Brown-Live, Green& Yellow- earth (For detachable plug only) As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire that is coloured Green& Yellow must be connected to the terminal in the plug that is marked with the letter E or by the earth symbol, or coloured green& yellow. The wire that is coloured blue must be connected to the terminal that is marked with the letter N or coloured black. The wire that is couloured brown must be connected to the terminal that is marked with the letter L or coloured red. INFORMATION ON DISPOSAL OF THIS PRODUCT Please note that this Adexi product is marked with this symbol: This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately. In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In some member states you can, in certain cases, return the used equipment to the retailer from whom you purchased it, if you are purchasing new equipment. Contact your retailer, distributor or the municipal authorities for further information on what you should do with electrical and electronic waste. GUARANTEE TERMS The guarantee does not apply: • if the above instructions are not followed • if the appliance has been interfered with • if the appli...