Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
This running total is shown in the “PmBurrsLbs #” menu, under the “SERVICE TOOLS” menu. This running total can be used to determine when the grinding burrs need cleaning or replacement. Pressing the button under “RESET” will reset this total to zero. GRINDER SCALE CALIBRATION 1. Place empty funnel into funnel rails. 2. Press and hold the right hidden (copyright) button until the “MACHINE TYPE” menu appears. (See level 2 programming) 3. Press the middle button under the screen until the “CALIBRATE SCALES?” menu appears. 4. Press the right button under “YES” in the “CALIBRATE SCALES?” screen. 5. Press the middle button under “TARE”. 6. When the “PLACE 8oz” screen appears, remove the funnel, and place a calibrated 8oz weight in the funnel. Replace the funnel in the funnel rails. 7. Press the middle button under “DONE”. The grinder will go through a calibration, and then return to the main screen when calibration is complete. 8. Remove the weight from the funnel. The grinder is now ready calibrated and ready for normal operation. BATCH SIZE SETTING 1. Press and hold the right hidden, (copyright) button until the “REVIEW RECIPIES” menu appears. (See level 1 programming) 2. Press the button under “YES” and the “COFFEE NAME” screen appears. 3. Press the button under “NEXT” until the name of the coffee you wish to set the batch sizes for appears. 4. Press “MODIFY” under the screen containing the name of the coffee you wish to set the batch sizes for. 5. Using the buttons under (-) and (+), change the weight displayed to the new weight desired. Press a different batch size button to set the weight for that batch size. Press the button under “DONE” when complete. 6. In the “3 BATCHES DONE” menu, if no further changes are to be made, press the button under “YES” to exit the “COFFEE CALIBRATION” menu. COFFEE CALIBRATION 1. After the “3 BATCHES DONE” menu, press “YES” to enter the “COFFEE CALIBRATION” menu. 2. This menu sets the “offset” weight for the coffee name selected, so that accurate weight grinding will be achieved. 3. With a funnel in place, press the “GRIND” button. After grinding, the coffee weight will be read and calibrated, and the “COFFEE NAME” “SETUP COMPLETE” menu will appear. Press the middle button to loop back and select another coffee name for batch size setting and calibration. 41451.0001 051010 COMMUNICATING WITH THE GRINDER Press the hidden(copyright) buttonfor 1 secondPress right hidden(copyright) button toscroll to next screenPress right hidden(copyright) button toscroll to next screenPressing “PREV” scrolls to the previous coffee namePressing “NEXT” scrolls to the next coffee namePressing “NEXT” scrollsto the next coffee namecontinue to (B) continue to (A) Press right hidden(copyright) button toscroll to next screenPress right hidden(copyright) button toscroll to next screenSET PASSWORD0 0 0ENTER PASSWORD0 0 0SELECT COFFEENO YESREVIEW RECIPES? NO YESENTER ASSET # 0 0 0SERVICE TOOLS? NO YESSMALL BATCHGRIND oz #.## “COFFEE NAME” MODIFY SHOW NEXT“COFFEE NAME” PREV DONE NEXTMEDIUM BATCHGRIND oz #.## LARGE BATCHGRIND oz #.## COFFE CAL # ## 41451.0001 111909 COMMUNICATING WITH THE GRINDER (Continued) From previouspageLoop back to“COFFEE NAME” Press “GRIND” button tostart coffee calibrationThe small batch size willflash, press (-) or (+) toadjust grind weight. Afterfirst batch size is set, additional batch sizes canbe set by pressing appropriatebatch size button. Press “DONE” after all three batch sizeshave been set. FINISHED, returnsto main screenfrom (A) FACTORY DEFAULTNO YESCALIBRATE COFFEENO ? YESTHREE BATCHES DONENO YES“COFFEE NAME” SETUP COMPLETEGRIND oz #.## (-) DONE (+) 41451.0001 111909 COMMUNICATING WITH THE GRINDER (Continued) Pressing any switch in thismode will display the switchname in the grinder display. After the funnel is “tared” add a calibrated weightto check scale. return to“FACTORY DEFAULTS” screenTEST FREQUENCY ? NO YESTEST SWITCHES ? NO YESTEST GRIND MOTORNO YESTEST SCALE ? NO YESSWITCHESENABL DISABLEPmBurrLBS # RESETCENTER SW TAREPRESS RIGHTHIDDEN TO EXITGRIND MOTORON NEXT OFF PLEASE WAITTARESENSOR BITS #### Weight ##ozfrom (B) TEST OUTPUTSNO YES 41451.0001 111909 COMMUNICATING WITH THE GRINDER (Continued) LEVEL 2 FUNCTIONS: Press the hidden(copyright) button for3 seconds in “ENTERPASSWORD” menu. Finished, returnsto main screenMODIFY MAXBITNO SPREAD? YESCALIBRATE SCALE ? NO YESMACHINE TYPEWEIGHT TIMEDSHUToff Bits ## (-) DONE (+) MaxBits read # (-) DONE (+) PLEASE WAITCALPLACE 8.00 ozEXIT DONE PLEASE WAITTARECALIBRATE SCALESEXIT TARECALIBRATION OZ(-) 8.00 (+) 41451.0001 111909 TROUBLESHOOTING A troubleshooting guide is provided to suggest probable causes and remedies for the most likely problems encountered. If the problem remains after exhausting the troubleshooting steps, contact the Bunn-O-Matic Technical Service Department. • Inspection, testing and repair of electrical equipment should be performed only by qualified service personnel. • All electronic components have 120 ...