Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
9. Remove the lid to the grinding bowl and fill bowl with 3 to 4 scoops of coffee beans. Replace the lid. 10.Set the grind fineness selector to number ‘4’, this is to ensure that the upper burr grinding wheel is moving properly. 11.Turn the power switch on the Sunbeam Burr Grinder to ‘ON’. 12.Push the ‘GRIND’ button for 2 seconds and release. Note: Your Sunbeam Burr Grinder is now prepared to be used on a regular basis. Grinding 1. Place the Sunbeam Burr Grinder on a dry, level surface. 2. Check to make sure that the grinding bowl is free of any foreign objects and that it is completely clean and dry. Using your Sunbeam Burr Grinder (continued) Using the portion-control container; 3. Ensure that the lid of the grinding bowl is removed. 4. Position the portion-control container directly on top of the grinding bowl. To lock into position turn the portion-control container clockwise, see figure 1. Figure 1 5. Pour coffee beans into the portion-control container and position the lid. Slowly turn the lid of the portion-control container, in a clockwise direction, with each turn or click enough beans for 2 cups of coffee are dispensed into the grinding bowl, see figure 2. The grinding bowl holds enough beans for up to 16 cups of coffee. Figure 2 Using the grinding bowl 6. Alternatively coffee beans can be poured directly into the grinding bowl. Replace the lid. 7. Set the grind fineness selector, see figure 3. Figure 3 8. Plug the power cord into a 230-240V AC power outlet and switch the power on. 9. Turn the power switch on the Sunbeam Burr Grinder to ‘ON’, the switch will illuminate, see figure 4. Note: Ensure that the lid on the portioncontrol container or grinding bowl is secure and in place. 10.Push the ‘GRIND’ button for 2 seconds and release. The Sunbeam Burr Grinder will grind all the beans in the grinding bowl, once empty it will then stop automatically. Note: Oily beans may stick together and not feed into the burrs. This can cause the automatic sensor to turn off the grinding action. Should this occur, just tap the housing of the Sunbeam Burr Grinder a few times to loosen up the beans and push the ‘GRIND’ button again to resume grinding. 11.While still positioned in the grinder, tap the ground coffee container a few times, this allows the ground coffee to settle down into the container. Now, slowly remove the container from the Sunbeam Burr Grinder, see figure 5. Before removing the lid to the ground coffee container, tap the container again a few times to settle more of the ground coffee, see figure 6. 6 Using your Sunbeam Burr Grinder (continued) Figure 4 Figure 5 Figure 6 Using your Sunbeam Burr Grinder (continued) 12.Turn the power switch on the Sunbeam 13.Once the ground coffee container is Burr Grinder to ‘OFF’, see figure 7. emptied, insert the empty ground coffee container with the lid securely in place back into the Sunbeam Burr Grinder. Note: Allow the Sunbeam Burr Grinder to cool down for 5 to 10 minutes before grinding again. Figure 7 Guidelines for 17-position grind fineness selector The grind fineness selector gives you the choice of 17 positions, allowing you to find the perfect grind selection for a superb result in all styles of coffee machines. Note: The finer you select the coffee grind to be, the longer it will take to grind. Grind Fineness Selector Note: If you grind in the finer settings (settings from 1 to 3) we recommend cleaning the ground coffee spout and upper burr grinding wheel after each grinding session to avoid clogging. See the Care and Cleaning section on page 9 for more details. Suited Style of Coffee Machine 8 - 9 French Press Coffee Makers Percolators 4.5 – 6 Non-Pump Espresso (steam/boiler) Machines 3.5 – 5 Drip Coffee Makers 2.5 – 4 Pump Espresso Machines 1 – 2.5 Fully Automatic Coffee Centres Note: The fineness settings are approximate guidelines. For pump espresso machines and automatic coffee centres, if your coffee or espresso brews too fast try a lower number setting than indicated above. If it brews too slowly, try a higher setting than the ones recommended above. Care and Cleaning Do not immerse the motor base of the Sunbeam Burr Grinder in water. Do not place any parts of the Sunbeam Burr Grinder in the dishwasher. 1. When you have finished grinding, unplug the grinder from the power outlet. 2. Empty the ground coffee container. 3. The portion-control container and lid, the separate grinding bowl lid (if used) and the ground coffee container and its lid can be washed in warm soapy water. Rinse and dry thoroughly. 4. With the small brush (provided), brush away any ground coffee particles from the ground coffee spout (where the ground coffee comes out and into the ground coffee container), see figure 8. Figure 8 ground coffee spout 5. Wipe the base exterior and grinding bowl clean with a damp cloth. Removing and cleaning the burr grinding wheel Note: Do not immerse the upper burr grinding wheel in water or any other liquid. 6. Turn the grind fineness selecto...