Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
page 9 Firebox finishes ............................... page 10 Replacement Parts .......................... page 10 Accessories/Components ................ page 10 Replacement Parts List .................... page 11 GENERAL INFORMATION These ventless firebox enclosures are designed to accept all ANSI Z21.11.2 approved Decorative Type Unvented Gas Log Room Heaters. For the appropriate Unvented Gas Log Room Heater model, refer to the chart below. Refer to the installation instructions provided with the log sets for detailed instructions. The UVFC Series are unvented fireboxes. They feature a self-contained heat-circulating system. The UVFR Series is a conventional radiant- heat unvented firebox. This installation manual will enable you to obtain a safe, efficient and dependable installation of your room heater system. Do not alter or modify the firebox or its components under any circumstances. Any modification or alteration of the firebox system, including but not limited to the firebox and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation. These Built-In Unvented Fireboxes have been tested and approved as Ventless Firebox Enclosures for Gas-Fired Decorative Type Ventless Room Heaters to IAS 2-97. WARNING: THESE BUILT-IN UNVENTED FIREBOXES HAVE ONLY BEEN TESTED AND APPROVED FOR USE WITH ANSI Z21.11.2 UNVENTED GAS LOGS. DO NOT ATTEMPT TO BURN SOLID WOOD FUELS, OTHER GAS LOG SETS OR ANY OTHER COMBUSTIBLE MATERIALS IN THIS UNVENTED FIREBOX. Log Set Sizing Reference Chart Unvented Firebox Unvented Room Heater Log Set Model Natural Propane (L.P.G) UVFC-500 VFGL-18/24MN/VN-3 VFGL-18/24MP/VP-3 PVFGL-18MN/VN PVFGL-18MP/VP UVFC-600 VFGL-24/28MN/VN-3 VFGL-24/28MP/VP-3 PVFGL-24MN/VN PVFGL-24MP/VP UVFR-500 VFGL-18/24MN/VN-3 VFGL-18/24MP/VP-3 PVFGL-18MN/VN PVFGL-18MP/VP UVFR-600 VFGL-24/28MN/VN-3 VFGL-24/28MP/VP-3 PVFGL-24MN/VN PVFGL-24MP/VP Check the inventory list to be sure that you have all the necessary parts in usable condition. Also check for concealed damage. Inventory Unvented Gas Firebox Canopy Gas Connector Fittings Installation and Operating Instructions Tools and Building Supplies Normally Required Tools Should Include: Phillips screwdriver Hammer Saw and/or sabersaw Level Measuring tape Electric drill and bits Pliers Square Piping complying with local codes Pipe wrench Tee joint Pipe compound Building Supplies Should Include: Framing materials Wall finishing materials Caulking materials (noncombustible) Fireplace surround materials (noncombustible) IMPORTANT SAFETY INFORMATION INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH THE OWNER. OWNER: PLEASE RETAIN THESE INSTRUCTION FOR FUTURE REFERENCE IMPORTANT: BEFORE STARTING YOUR FIREBOX INSTALLATION, READ THESE INSTALLATION INSTRUCTIONS CAREFULLY TO BE SURE YOU UNDERSTAND THEM COMPLETELY AND IN ENTIRETY. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD CAUSE A HEATER MALFUNCTION RESULTING IN SERIOUS INJURY AND/OR ...
Эта инструкция также подходит к моделям:Камины - UNVENTED FIREBOXES UVFC-500 (2.24 mb)
Камины - UNVENTED FIREBOXES UVFC-600 (2.24 mb)
Камины - UNVENTED FIREBOXES UVFC-500 (2.24 mb)
Камины - UNVENTED FIREBOXES UVFC-600 (2.24 mb)