Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
The BLUETREK ® G2 offers many functions, please read this manual. manual before getting started. - Pair the headset with a mobile phone. Please refer to the “ Pairing BLUETREK ® G2” section of this manual. EC-Declaration of Conformity We, Innovi Technologies Ltd of Introduction 31/F China Online Centre, 333 Lockhart Road, The BLUETREK ® G2 headset is a wireless headset based on the Bluetooth ® Wan Chai, Hong Kong technology. It complies with Bluetooth ® 1.2 protocol, supporting Headset and Hands- free profile. declare under our sole responsibility that our product The BLUETREK ® G2 headset has 3 buttons: BLUETREK G2 • “TALK “ button ( main button) , • 1 “ VOL+ “ button, to which this declaration refers is in conformity with the appropriate standards • 1 “VOL- “button. EN300 328- 02 EN301 489- 17 EN301 489- 01 Microphone Talk button EN50371 Indicator light VOL - button EN60950 VOL + button Following the provisions of Radio and Telecommunications Terminal Equipment Charging Speaker directive 1999/5/EC. socket November 2005 Guillaume Ponticelli, Director of Development FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference. ( 2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this Bluetooth ® headset not expressly approved by the party responsible for compliance could void the user’s authority to operate it. Industry Canada notice to users and product statements To prevent radio interference with the licensed service, this device is intended for operated indoors and away from windows to provide maximum shielding. Equipment ( or its transmit antenna) that is installed outdoors is subject to licensing. In compliance with Industry Canada regulations, technical specifications have been provided in a declaration of conformity. This does not imply that Industry Canada approved the equipment. Bluetooth ® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license. PAGE 1 / 6 PAGE 2 / 6 Charging the BLUETREK ® G2 Wearing the BLUETREK ® G2 Please connect the charger to the headset and to the mains. During the charge, the The headset can be used on both ears. Rotate the ear clamp if you want to use it on the indicator light is red. The indicator light will turn off when the charge is complete. During other ear. The ear clamp is made of soft material which can be easily shaped to fit your subsequent charges, the charging should take approximately 2 hour 40 minutes. ear. Make sure the speaker is properly inserted into your ear. When you hear a light beep in your headset at regular intervals, and the indicator light flashes in red, your headset needs to be recharged. Switching the BLUETREK ® G2 ON and OFF Important: Switching BLUETREK ® G2 ON • The headset cannot be operated while charging. To maximize battery capacity, it When your headset is off, press and hold the TALK button for about 2 seconds until the is recommended to recharge your headset to full capacity only when the battery blue indicator light is on. A beep ( 2 tones) can be heard in the speaker. Release the is low, since a battery has a lifetime of about 500 charging cycles. TALK Button. • If you leave your headset battery empty for an extended period of time, it could To check if your headset is ON, press once on the TALK button. If the indicator light excessively discharge the battery. In this case, charge your headset for 10 hours flashes blue, it means your headset is ON. or more until the battery recovers and recharges completely. Only switch on the headset once the red indicator light turns off, indicating the battery has fully Switching BLUETREK ® G2 OFF recovered. When your headset is on, press and hold the TALK button for about 5 seconds until the red indicator light is on after the quick blue flashes. A beep ( 2 tones) can be heard in the • Do not let the battery charger remain plugged in the headset for more than 24h. speaker then release the TALK Button. • The use of any other charger will automatically suspend the warranty. Making a call Pairing the BLUETREK ® G2 *Mobile phone with voice recognition . Make sure the voice recognition function on your mobile is activated and your voice Before using the BLUETREK ® G2 headset, you must pair it with your Bluetooth ® mobile tags have been recorded with the phone. To enter these, please refer to your phone’s phone. Pairing is the process of linking 2 Bluetooth ® devices, so that they can manual . When there is no incoming or active call, press once on the TALK button communicate. . Wait for the audio signal sent by the mobile phone ( generally a short tone) . . Speak the name of person you wish to call. To initiate pairing: 1. Place the BLUETREK ® G2 and your mobile phone within 0.3 meter ( 1 foot) from Mobile without voice recognition . Make sure both the heads...