Оценок - 3, средний балл: 3.7 ( )

Производитель: Invacare Размер: 177.25 kb Название файла: Язык инструкции:

Installing the Contracture Assembly - Reversed Mount (FIGURE 3) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in the SAFETY SUMMARY of this instruction sheet. 1. Remove the contracture footplate. Refer to CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT in this instruction sheet. 2. Align the mounting holes of the contracture footplate assembly with two (2) desired mounting positions of the crossmember assembly. 3. Secure the contracture assembly to the crossmember assembly with two (2) mounting screws, washers and locknuts provided. Securely tighten. 4. Reinstall the contracture footplate. Refer to CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT. 5. If necessary, repeat STEPS 1-4 for the other contracture assembly. Outer Tube Contracture Assembly Insert Tube Washers Mounting Holes Mounting Screws Lock Nuts Outer Tube FIGURE 2 - REMOVING/INSTALLING THE CONTRACTURE ASSEMBLY - FORWARD MOUNT Shoulder Screw Seat Frame (Rear) Bearing Housing Allen Screw Spacer Link Bracket Lower Seat Frame Base Frame Locknut Locknut Seat Frame DETAIL “A” Seat Frame Mounting Screws Lock Nuts Crossbrace (Rear) Insert Tube Outer Tube Brace Support Seat Frame Brace Support DETAIL “B” FIGURE 1 - INSTALLING THE CROSSMEMBER ASSEMBLY CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT (FIGURE 4) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in the SAFETY SUMMARYof this instruction sheet. 1. Remove the mounting screw and locknut used to lock the angle adjustment of the contracture assembly. 2. Lift the contracture support UP/DOWN to achieve the desired angle. 3. Align the mounting hole in the contracture support with one (1) of seven (7) mounting holes on the angle adjustment bracket. 4. Reinstall the mounting screw and locknut used to lock the angle adjustment of the contracture assembly. Securely tighten. 5. If necessary repeat STEPS 1-4 on remaining contracture assembly. FIGURE 4- CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT Angle Adjustment Bracket Mounting Hole Locknut Contracture Support Mounting Screw USING THE OPTIONAL QUICK RELEASE PIN (FIGURE 5) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in the SAFETY SUMMARYof this instruction sheet. NOTE: The Quick Release Pin replaces the mounting screw that is used to lock the angle adjustment of the contracture support. NOTE: If not installed attime of shipment, the quick release pin must be installed by a qualified technician only, using a 1/8-inch pop rivet. 1. Press the button on the quick release pin and insert through the contracture support and the angle adjustment bracket. 2. If necessary adjust the angle of the contracture assembly. Refer to CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT in this instruction sheet. 3. Repeat STEPS 1-2 on the remaining contracture assembly. Angle Adjustment Bracket Pop Rivet Button Contracture Support Quick Release Pin FIGURE 5 - USING THE OPTIONAL QUICK RELEASE PIN ANGLE ADJUSTMENT OF THE CONTRACTURE FOOTPLATE (FIGURE 6) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: