Оценок - 2, средний балл: 3.5 ( )

Производитель: Braun Размер: 1.49 mb Название файла: Язык инструкции:

This symbol indicates important information iarity with proper operation regarding how to instructions as well as proper avoid a hazardous installation and maintenance situation that could procedures are necessary to result in minor per- ensure safe, troublefree opera sonal injury or prop tion. Safety precautions are erty damage. provided to identify potentially hazardous situations and provide instruction on how to avoid them. Note: Additional information provided to help clarify or detail a specific subject. D These symbols will appear throughout this manual as well as on the labels posted on your lift. Recognize the seriousness of this information. Lift Operation Safety Precautions WARNING WARNING If the lift operating instructions, manual operating instructions and/or lift operation safety precautions are not fully understood, contact The Braun Corporation immedi- ately. Failure to do so may result in serious bodily injury and/or property damage. WARNING WARNING WARNING WARNING WARNING Read manual and supplement(s) before operating lift. Read and become familiar with all safety precautions, pre-lift operation notes, operating instructions and manual operating instructions before operating the lift. Load and unload on level surface only. Engage vehicle parking brake before operating lift. Provide adequate clearance outside the vehicle to accommodate the lift before opening lift door(s) or operating lift. Inspect lift before operation. Do not operate lift if you suspect lift damage, wear or any abnormal condition. Keep operator and bystanders clear of area in which the lift operates. WARNING Stand clear of doors, stepwell and platform during lift operation. WARNING Do not jack the vehicle by the bumper or frame, this could cause damage to the drive shaft and/or wheelchair lift. WARNING Whenever a wheelchair passenger (or standee) is on the platform, the: • Passenger must be positioned in center of platform • Wheelchair brakes must be locked • Roll stop must be up (vertical) • Passenger should grip both handrails if able (if so equipped). Page 5 Lift Operation Safety Lift Operation Safety Precautions (continued) WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING Load and unload clear of vehicular traffic. Do not overload or abuse. The load rating applies to both the raising and lowering functions - continuous lifting capacity is 750 lbs. Do not operate or board the lift if you or your lift operator are intoxicated. Do not raise front wheelchair wheels (pull wheelie) when loading (boarding) the platform. Open lift door(s) fully and secure before operating lift. Position and secure (buckle, engage, fasten, etc.) the wheelchair-equipped occupant seat belt (torso restraint) before loading onto the wheelchair lift platform. Fold manual-fold handrails down before stowing lift. Lift occupant must keep hands, arms and all other body parts within the lift occupant area and clear of moving parts. Platform must be positioned at floor level when loading or unloading in and out of vehicle. Do not use the outboard roll stop as a barrier (brake). Stop and brake wheelchair when fully loaded on the platform (manually stop and brake manual wheelchairs — stop powered wheelchairs with the wheelchair controls). Turn powered (electric) wheelchairs off when on lift platform. Press the DOWN switch until the entire platform rests on ground level (lowered fully) and the outboard roll stop is fully unfolded (ramp position) before loading or unloading a passenger at ground level. Outboard platform roll stop must be fully unfolded (ramp position) before front and rear wheelchair wheels cross roll stop when loading or unloading at ground level. Accidental activation of control switch(es) may cause unintended operation(s). After manually releasing platform, stow platform and push manual release T-handle in fully and move platform in and out to engage platform lock before driving vehicle. Failure to lock platform may result in unintended platform deployment. Insert manual release T-handle fully before manually lowering or raising platform and manually move platform in and out to engage platform lock. Maintenance and lubrication procedures must be performed by authorized (certified) service personnel. Replace missing, worn or illegible decals. Keep owner’s manual in lift vehicle at all times. Never modify (alter) a Braun Corporation lift. Do not use accessory devices not authorized by The Braun Corporation. Do not remove any guards or covers. Page 6 Lift Operation Safety Lift Operation Safety Precautions (continued) WARNING Keep clear of any hydraulic leak. WARNING Failure to follow these safety precautions may result in serious bodily injury and/or property damage. Pre-Lift Operation Notes WARNING Read and become familiar with all lift operation safety precautions, pre-lift operation notes, operating instructions a...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: