It can also be installed by the traditional full spread method using S-288 adhesive over approved substrates and underlayments. The modified loose lay method requires that the flooring be cut 1/8" to 3/16" away from all vertical surfaces such as walls, cabinets, pipes, etc. This gap must then be filled with a good quality siliconized or acrylic caulk. • Transport and store flooring rolled face out on a cardboard tube, do not kink or distort. • Always roll flooring face out until ready to install

Important! Please follow these instructions. This kit may be different from the one specified in instruction booklet. COMBINATION 8X8 and 10X8 FLOOR KIT This floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor size FOR MARCO SERIES, SOLAR SHED AND MWP IMPERIAL ONLY This floor kit is for 10’ x 7’ 8-5/8” and 8’ x 7’ 8-5/8” buildings. Please refer to the appropriate pages of this instruction manual to build the floor size needed. If constructing an 8X8 storage building, you w

Useful Numbers UK Sales 0845 366 0400 Export Sales +44 (0)1295 814316 Installations 01295 814310 Technical 01295 814271 Home Deliveries 01295 814313 Customer Care 01295 814396 Disclaimer The specifications and technical information given in this publication are intended for guidance and although they are to the best of our knowledge correct, they are given without warranty. We cannot accept any responsibility for reliance placed upon the advice contained herein since practical expertise and site

Press lightly on the scale platform. The display will turn on, then show “0.o” and automatically turn off. The scale is now ready for use. N NNo oot tte ee: ::The scale may need to be initialized if it is moved or bumped. G GGe een nne eer rra aal ll O OOp ppe eer rra aat tti iio oon nn 1. Step directly on scale. 2. The display will show “0” running from left to right, then display the weight. After you step off scale, the display will return to “0.o” and turn off. 3. The weight will remain disp

They realised it was the most efficient and effective form of heating, this is as true today as it was then. The Fired Earth range of electric systems take the Roman genius into the modern era, enabling underfloor heating to be laid simply and efficiently in new and existing buildings. Fired Earth have systems that can be used as the sole source of heating or simply just to warm an otherwise cold floor. They are suitable for use with all Fired Earth floor tiles. Electrical Heating There are many

Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. REV 09i SPECIFICATIONS DESCRIPTION 15’L X 1”W Reinforced Nylon Strap Steel Plates 5/16” X 5-1/8” 5-1/8” X 7-1/2” 4-3/4” X 5-1/8” 2.25 Lbs. ITEM Ratcheting Capacity Body Construction Plate Holding Edge Fixed Plate Dimensions Rachet Plate Dimensions Net Weight SAVE

Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road. Step 1. Step 2. ! Screw the flexible steel shaft into the seat track bolt bracket. With a socket wrench, loosen the passenger seat track bolt, in- sert the seat track bolt bracket, and retighten the seat track bolt. Floor or Console Mounting For a more permanent mount, connect the Floor / Console Mount Bracket to the floor or console. This will require drilling into your vehicle’s interior surfac

¦ Commercial kitchens and commercial food processing areas. ¦ Where pointed spikes such as golf or track shoes will be used. ¦ Where the floor will be subjected to unusually concentrated static or dynamic loads. NOTE: Concentrated static and dynamic loads such as hospital beds, roll-out bleachers, portable x-ray machines, etc. may visibly damage resilient as well as other types of floor coverings. For questions regarding product suitability and detailed instructions for floor preparation and ins

per cu. ft. (1441 kg/m3) or cellular concrete having a plastic (wet) density less than 100 lbs. per cu. ft. (1602 kg/m3) [94 lbs. per cu. ft. (1506 kg/m3) dry weight], or concrete having a compressive strength of less than 3500 psi (24 MPa). Concrete slabs with heavy static and/or dynamic loads should have higher design strengths and densities calculated to accommodate such loads. Concrete curing agents, sealers, hardeners, or parting agents should be removed. TECHNICAL DATA Shipping Weight 63 l

Construction and Colors Color and pattern detail are dispersed uniformly throughout the thickness of the material. Color pigments are insoluble in water and resistant to cleaning agents and light. Size 12 in. x 12 in. (305 mm x 305 mm) tile Gauge (nominal thickness) 1/8. (3.2 mm) Limitations These products should not be used in the following areas: ¦ Hospital operating rooms. ¦ Heavy industrial and exterior areas. ¦ Commercial kitchens and commercial food processing areas. ¦ Where pointed spikes